Used Heat Exchangers in Utrecht, Netherlands

2012 Alfa Laval Front 8 RM

• Manufacturer: Alfa-Laval

Plate heat exchanger, sanitary (PHE). Pressure: 10,0 bar - Beam length: 180 cm, connections: 8 x 3" DIN. Current configuration: 3 Sections: 37-48-36 plates (total 121) - Connections head: 1 up and 2 down, followe...

1995 Alfa Laval CLIP10-RM

• Manufacturer: Alfa-Laval

Pressure: 10 bar. Current configuration: 1 Section. Connections: head: 2 up, follower 2 up.

N.N. Monotube

• Manufacturer: N.N.

Monotube. 1 Tube with internal spiral. Length: 150 cm, outside diameter 70 mm, inside diameter 50 mm. Connections, product: DN50 Clamp and service: DN16, DIN.

Stork DS 1525

• Manufacturer: Stork

Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.

1989 Crepaco 1HRT-672

• Manufacturer: Crepaco

Scraped surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10...

2009 Tetra Pak Hot water set / MT-108

• Manufacturer: Tetra Pak

Hotwater set with tubular heat exchanger, steam valve (Samson) and piping. Pressure: shell 0-15 bar, tubes 0-40 bar. Temperature: shell 0-180 °C, tubes 0-180 °C. Volume: shell 9,3 liter, tubes 6,1 liter.

APV 3HD672

• Manufacturer: APV - Gaulin

Scrape surface heatexchanger. 2 product cylinders. Tube Ø 150 mm. Surface per tube 0,84 m². 1x Main motor which drive both dashers. Previous used on heating media: steam. Pressure product side: 12 bar. Pressure s...

1977 Crepaco/APV 1HRT-672

• Manufacturer: Crepaco

Sraped Surface heatexchanger with 1 product cylinder, in stainless steel, tube diameter: 165 mm, length 1,830 mm. Rotor with 4 scrapers. Surface per tube 0,84 m² and volume per tube 40 ltr. Pressure: 150 psi (10 ...

2005 APV Crepaco SSHE

• Manufacturer: Crepaco

Scraped heater - cooler set, used as sterilizer, including 3 holding tubes 30 - 30 - 210 seconds (various options possible on swingbend panel). Each scraped heaterexchanger has a temperature indicator on water an...

1998 Alfa Laval CLIP 8-RM

• Manufacturer: Alfa-Laval
• Model: CLIP 8-RM

Pressure: 7 bar. Beam length: 1800 mm. Connections: SMS. Current configuration: 1 Section: 164 plates - Connections head: 2 up, follower 1 down. Weight total: 1.718 kg.

Tubular Heatexchanger

Monotube, inner diameter (product) 23mm outer diameter (water) 40mm, 42 tubes x 3 mtr each. total dimensions: Length 3.00 mtr x Width 1.30 m, Height 1.50 mtr. On a stainless steel frame. Flexible in using, many l...

2009 Alfa Laval M10-MFG

• Manufacturer: Alfa-Laval
• Model: M10-MFG

Hot water set. PHE: Pressure: 7 bar. Beam length: 70 cm, connections: 4'', flange. Currenct configuration: 1 Section: 19 plates - Connections head: 2 up / 2 down. Including Alfa Laval centrifugal pump, year 2009...

1998 Baelz 106-42-45-FN-B1

• Manufacturer: Baelz

Tubular Heatexchanger Steam/Water. Multitube. Spiral design. 1 Tube. 1 Section. Length: 0,95 mtr. Outer diameter 280 mm. 42x tubes of 8 mm inner diameter. Steam section: 18 bar, 250 °C, 14 ltr. Water section: 10 ...

2008 GEA WP4-08

• Manufacturer: GEA

New/unused GEA plate heat exchanger with 8 plates and a total surface area of ± 0,25m² (working on refrigerant/water).

RAFFEL NH3 – 722 m²

• Manufacturer: RAFFEL

Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Link for smaller capacities (same type): 276m², 378m², 554m², 648m²