Used Heat Exchangers in New Jersey, USA

Plate and Frame Heat Exchanger 96 m² (1,033 ft²) Stainless Steel 316 - IPP# 232793

• Manufacturer: Schiller Apparatebau Gmbh

Vertical thermo panel bank condenser / heat exchanger (plate pack in a cylindrical shell) Pressure plate side: 10 bar @ 110 degrees C (190 liter) Shell side: 10 bar @ 250 degrees C (2700 liter) (38) 316L (1.4404)...

APV SR6-GLM-T

• Manufacturer: APV

Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76...

Shell and Tube Heat Exchanger 198 m² (2,131 ft²) Stainless Steel Austenitic - IPP# 214073

• Manufacturer: K. LEY Germany

no heads pressure tube side -1/6 bar @ -10/+350 deg C (1670 liter) shell side -1/6 bar @ -10/+350 deg C (1920 liter) heating cab -1/6 bar @ -10/350 deg C, volume 18 liter

Plate and Frame Heat Exchanger 50.8 m² (546.8 ft²) Stainless Steel 316 - IPP# 222335

• Manufacturer: Schmidt API heat transfer

Type: Plate heat exchanger (pre-heater) Plate material: 316L stainless steel (1.4404) pressure on both sides -5/6 bar @ 120 degrees C (91 & 89 liter) carbon steel pressure plates and frame, 316L stainless steel (...

Shell and Tube Heat Exchanger 137.5 m² (1,480 ft²) Stainless Steel 316 - IPP# 220775

• Manufacturer: Buflo Vac-Blaw Knox

heat exchanger (steam chest)

Tantalum Tube, head and 316L stainless steel shell Heat Exchanger - IPP# 247252

Shell and Tube Heat Exchanger 23.3 m² (250.8 ft²) Graphite - IPP# 204133

• Manufacturer: VICARB

condenser

Shell and Tube Heat Exchanger 9.3 m² (100 ft²) Carbon Steel - IPP# 246764

Shell and Tube Heat Exchanger 1.75 m² (18.8 ft²) Graphite - IPP# 204141

• Manufacturer: VICARB

condenser

Shell and Tube Heat Exchanger 6.4 m² (68.9 ft²) Graphite - IPP# 204115

• Manufacturer: VICARB

condenser

Monel ITT Standard BSM 12x120 Shell and Tube Heat Exchanger - IPP# 206262

• Manufacturer: ITT

Monel 400 Heads/ Monel Tubes No heads with unit, requires direct piping or (2 )bolted heads.

Shell and Tube Heat Exchanger 13.9 m² (150 ft²) Stainless Steel - IPP# 203547

Expansion joint in shell Vent and drain are 1"

Stainless Steel 316 Clad Mechanica Sarda BEM Shell and Tube Heat Exchanger - IPP# 222661

• Manufacturer: Mechanica Sarda

Type: Vertical condenser pressure tubeside 18 bar/full vacuum @ 130 degrees C , 945 liter; shell rated 12 bar @ 130 degrees C, 895 liter. Baffles: (7) 304SS baffles in the shell (2) bolted heads; (1) 316L stainle...

Stainless Steel 304 Motherwell Bridge Fabrications Ltd Shell and Tube Heat Exchanger - IPP# 226237

• Manufacturer: Motherwll Bridge Fabrications Ltd

(2) 304L stainless steel hemispherical heads Design code: V111 DIV.1 & TEMA 'R'

Shell and Tube Heat Exchanger 212.8 m² (2,291 ft²) Carbon Steel - IPP# 98389

• Manufacturer: Fabsco

split flow shell side