Used Heat Exchangers in New Jersey, USA

Carbon Steel Alfa Laval Spiral Heat Exchanger - IPP# 201674

• Manufacturer: Alfa-Laval

Additional Info:

Stainless Steel Oostndorp Shell and Tube Heat Exchanger - IPP# 221545

• Manufacturer: Oostndorp

design pressure tube side 7 bar @ -15/+235 deg C, shell side -1/5.3 bar @ -15/+135 deg C, (2) c/steel dished head Duplex (SAF-2205) tubes

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 207019

• Manufacturer: Yula

MDMT is 40 psi @ 190 Degrees F for the shell and 40 @ 150 Degrees F.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Heat Exchanger Shell and Tube Stainless Steel 304 - IPP# 216085

• Manufacturer: Graham

Cooling water lines: two 8" lines. 2 pass design

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 245829

• Manufacturer: Alfa Laval

carbon steel pressure plates and frame,

Hastelloy - C276 Plate and Frame Heat Exchanger - IPP# 201585

• Manufacturer: VICARB

Process sidde rated 45 PSI @ -30/+122 degrees F. Service side rated 30 PSI @ -30/+122 degrees F.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 81090

• Manufacturer: Paterson Kelly

304SS plates Max working pressure 100 psi @ 200 deg F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 233721

• Manufacturer: APV

316 SS plates with CS frame, rated for 199585 lbs./hr. water and 210539 lbs./hr. glycol.

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232711

• Manufacturer: APV /Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

Plate and Frame Heat Exchanger 18 m² (194 ft²) Stainless Steel 316 - IPP# 203245

• Manufacturer: Bariquand Platulaire Heat Exchanger

welded plate heat exchanger with 316TiSS wetted parts horizontal design 0.7 bar working pressure 90 dm3 capacity 125 dm3 capacity All wetted parts are material Z2CND 17-12 France standard, (3156TiSS) The rectangu...

Titanium APV SR25 Plate and Frame Heat Exchanger - IPP# 207660

• Manufacturer: APV

Titanium plate heat exchanger CS end plates. (2) 2.5" inlets; (2) 2.5" outlets Temperature in 95F hot side 194F cold side , temperature out 131F hot side 156F cold side .

Hastelloy C-276 Tranter plate coil heat exchanger - IPP# 235861

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 245565

• Manufacturer: Enerquip LLC