Used Granulators & Pelletizers in Illinois, USA

RAPID 1831C GRANULATOR 14282

Rapid model 1831C granulator s/n 70.345 18″ x 31″ feed throat 3 knife open rotor 2 bed knife tangential cutting chamber. 12″ x 12″ left hand profile chute only in-feed hopper or standard double wall tray feed hop...

CUMBERLAND 1837B GRANULATOR 18885

• Manufacturer: Cumberland

One (1) used Cumberland model 1837B granulator. 18″ x 37″ feed entrance with a three (3) knife high shear rotor. Two (2) bed knives. Rotor is v-belt driven by a 100 HP 1780 RPM North American inverter duty motor ...

CUMBERLAND 8″ 48 KNIFE PELLETIZER 18116

• Manufacturer: Cumberland

One (1) Used 8″ Cumberland “Quietizer” pelletizer. S/N 264550-940006. Rotor is driven by a 15 HP A/C motor with inverter. 3 HP A/C pull roll motor. Has (48) knife solid helical rotor. Air actuated nip rolls. Soun...

GALA MUP7 UNDERWATER PELLETIZING SYSTEM 18844

Used Gala MUP7 underwater pelletizing system(2010). Serial number 10201571.Package consists of the following: A) 6″ hydraulic slide plate screen changer with stand and 3 HP power pack B) 15 KW Cutter with stand, ...

RAPID 2442RS HOG GRANULATOR 18894

Rapid model 2442RS hog granulator. S/N 85.324. 24″ x 24″ feed throat. Belt driven 20 knife hog rotor with 24mm bolt size knives. 3 bed knives. 100 HP 230/460-volt 1760 RPM motor motor. Dual flywheels. 8″ OD airve...

CUMBERLAND 5018H HOG GRANULATOR 18728

• Manufacturer: Cumberland

Cumberland model 50180H hog granulator. S/N 551000-84002. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. Pelican style in-feed hopper. 160mm rotor bearings with a...

NELMOR G1820M1 GRANULATOR 18469

• Manufacturer: Nelmor

Nelmor model G1820M1. No S/N. 18″ x 20″ feed throat. 3 knife open rotor, 2 bed knives. Tangential cutting chamber. 30 HP 230/460-volt motor. Insulated conveyor feed hopper and body panels. 6″ OD right hand airvey...

POLYMER 1010AE AUGER GRANULATOR 16721

Polymer model 1010AE auger granulator, S/N 1010AE443796. 10″ x 10″ feed throat, 3 knife solid rotor, 2 bed knife cutting chamber, 10HP 460V motor. 8″ OD auger with a 12″ x 47″ long auger area and a 30″ in-feed he...

BALL & JEWEL CGMB2045 GRANULATOR 18778

• Manufacturer: Ball & Jewell

Ball & Jewel model CGMB2045 granulator (Nelmor G2045MB). S/N 05L06403. 20″ x 45″ feed throat. Tangential cutting chamber. 3 knife open rotor with 2 bed knives. Insulated conveyor feed hopper and body panels. 8″ O...

CONDUX CS500/1000 GRANULATOR 1725

• Manufacturer: Condux

Condux model CS500/1000-III granulator, S/N 44. Approximately 20″ x 40″, 6 knife fly, beam support rotor, 2 bed knife, 24″ base. No starter and no hydraulics.Price: $15,000.00, as is, where is.

CUMBERLAND 2050H HOG GRANULATOR 18724

• Manufacturer: Cumberland

Cumberland model 2050H granulator. S/N 551000-86001. 20″ x 50″ feed throat. 18 knife hog rotor. 2 bed knives (4 pcs) with one in the raised position. No in-feed hopper. 160mm rotor bearings with air purge. Belt d...

PTI WATER RING PELLETIZING LINE 18007

One (1) used 1999 PTI pelletizing line with model TS4500 4.5″ 30:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42″ center-line height. The gearbox i...

CUMBERLAND 484 GRANULATOR WITH FEED 18635

• Manufacturer: Cumberland

Cumberland model 484 granulator. S/N 421000-92513. 14″ x 16″ feed throat. 3 knife slant cut rotor, 2 bed knife. 15 HP 460-volt motor. Front feed roll in-feed only. Polynetics 15″ wide steel grooved feed rolls are...

RAPID 2442RS HOG GRANULATOR 18808

Used Rapid model 2442RS hog granulator. S/N 85.859, 24″ x 42″ feed throat. 20 knife hog rotor. 3 bed knives. Dual flywheels. Conveyor in-feed hopper with pneumatic tilt back assist. Hopper conveyor in-feed is clo...

NELMOR G1215P1 GRANULATOR WITH FEED 16280

• Manufacturer: Nelmor

Nelmor model G1215P1 granulator. S/N 99K03325. 12″ x 15″ feed throat, 3 knife open rotor, 2 bed knife 15HP 208-230/460V 1,480 RPM motor. Double wall rear top hand feed with front mounted knurled steel feed rolls,...