Used Processing in Catalonia, Spain

GORRI 622-24 Cardboard Chuck Cutter - 2022

- Voltage 400V - Total installed power 2.25 kW. - 0.75 kW cut-off wheel motor. - Support table with 2 rollers 6000 mm long and 80 mm in diameter. - Maximum spacing between support rollers approx. 280 mm, with sev...

Cardboard Chuck Cutter

- Voltage 400V - 0.73 kW cut-off wheel motor. - Support table with 2 rollers 4300 mm long and 100 mm in diameter. - Maximum spacing between support rollers approx. 280 mm, with several intermediate positions. - C...

Automated truck loading silos

Untested functionality

STAINLESS STEEL BLADE MILL

Stainless steel mill on structure with 4 wheels. Without documentation

STAINLESS STEEL ATEX QUICK SIEVE SHAKER

Stainless steel ATEX quick centrifugal sieve shaker. On 4 wheels. Upper cone diameter 525 mm Lower cone diameter 130 mm Lower outlet diameter 150 mm No documentation

2010 CENTRIFUGAL SIEVING MACHINE IN STAINLESS STEEL 400-1800 Kg/h

Stainless steel sieve shaker with a capacity of 400-1800 kg/h Power 7.5 kw Year 2010

SKID STAINLESS STEEL PIN MILL 316 + SLEEVE FILTER + HOPPER

• Manufacturer: Fabricant inconnu

Skid with pin mill made of stainless steel, with a plate diameter of 160 mm, a bag filter and a hopper.

1999 BACHILLER STAINLESS STEEL BACHILLER MIXER MILL

• Manufacturer: Bachiller

Fan beater mill operates with a mobile disc with wear-resistant hard steel plates. Usable on two edges, against a static track. It is considered cold milling due to the high air flow it generates. Equipped with ...

2004 BACHILLER MDCB 300

• Manufacturer: Bachiller

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of ...

ROTAVAC ROTARY VACUUM FILTER STAINLESS STEEL 1219MM X 1524MM 5.8 M2

• Manufacturer: Fabricant inconnu

Used Rotavac stainless steel rotary vacuum filter. Approximately 1219mm wide X 1524mm diameter stainless steel drum with 5.8 square meter filtration area. Driven by 1.5 kW, 400 volts, 3/50, 1440-60 rpm gear motor...

2014 IRON CROWN MILL 18.5 kW

• Manufacturer: Fabricant inconnu

Crown mill made of iron equipped with control panel and converter The auger has a frequency converter With documentation

2010 DONALDSON DFPR0 8-R

• Manufacturer: Donaldson / Torit / DCE

Used bag filter manufactured by DONALDSON, model DFPRO 8-R.

1987 CADALPE MACCHINE ENOLOGICHE SPA C 18/80

• Manufacturer: CADALPE MACCHINE ENOLOGICHE SPA

Stainless steel spark plug filter, manufactured by CADALPE MACCHINE ENOLOGICHE SPA in 1987, model C18/80. Spark plug measurements: Length: 820 mm Diameter: 26 mm

PALL IOL71GB23R4

• Manufacturer: Pall

PALL filter made of stainless steel, with a capacity of 2.1 liters.