- Trusted Seller
Anritsu MD1230A
- Manufacturer: Anritsu
- Model: MD1230A
Data Quality Analyzer The Anritsu MD1230A is a general-purpose measuring instrument for IP networks. The MD1230A integrates router performance testing function with network monitoring function.
Cary, NC - Trusted Seller
Anritsu MD1230B
- Manufacturer: Anritsu
- Model: MD1230
Data Quality Analyzer Anritsu MD1230B Data Quality Analyzer and other Network Testing Analyzers for sale at Test Equipment Center.
Cary, NC 
Anritsu MD1230B Data Quality Analyzer with MU120131A Ethernet Module
- Manufacturer: Anritsu
- Model: MD1230
Up for sale is a used Anritsu MD1230B Data Quality Analyzer with MU120131A Ethernet Module. It has been power on tested.
Anritsu MW9001B
- Manufacturer: Anritsu
The Anritsu MW9001B OTDR, also known as the Wiltron OTDR, is a sophisticated optical time domain reflectometer widely used in telecommunications to test and resolve issues in fiber optic networks. This OTDR boast...
Farmingdale, NJ
Anritsu MP1702A
- Manufacturer: Anritsu
- Model: MP1702A
Features & Specifications: Auto-search function for setting optimum values of input threshold and phase setting by a "one-touch" operation Synchronization of 512 kbit pattern is easily made within a short preiod ...
Anritsu MP1756A
- Manufacturer: Anritsu
- Model: MP1756A
15GHz Error Detector Cal: Calibration Available | As-is: Unit Sold AS-IS
Anritsu MT1810A
- Manufacturer: Anritsu
- Model: MT1810A
Various plug-in modules (hereinafter, referred to as “module”) can be installed into the MT1810A, to support research, development, and production of module devices for the optical communication market or interco...
Anritsu MU181000A
- Manufacturer: Anritsu
- Model: MU181000A
The MU181000A is a module that can be built into a Signal Quality Analyzer Series mainframe. It outputs clock signals of 100 MHz to 12.5 GHz to be input to the MU181020A 12.5 Gbit/s PPG or the MU181800A 12.5 GHz ...
Anritsu MH955C1
- Manufacturer: Anritsu
- Model: MH955C1
Key Specifications: Wavelength: 1.31/1.55 µm. | Pulse width: .1/1/10 µs. | Dynamic range: 28/25 dB. | Distance range: 25 to 80 km full scale with 1m resolution. | Cal: Calibration Available | As-is: Unit Sold AS-...
Farmingdale, NJ
Anritsu MU150122A
- Manufacturer: Anritsu
This unit installs a 10/10.7G optical interface in the MP1590B and MP1591A. Previously, both the MU150121A 10/10.7G Optical Unit (Tx) and the MU150122A Optical Unit (Rx narrow) were required to install a 10/10/7G...
$1,950 USDFarmingdale, NJ
Anritsu MP9654A
- Manufacturer: Anritsu
- Model: MP9654A
The MP9654A, with an internal DC amplifier, can be fitted with an optional 4th order Bessel-Thomson filter. It also has an optional APD setting for low level light reception. It can be used for research, developm...
$4,148 USDFarmingdale, NJ
Farmingdale, NJ
Anritsu MP1603A
- Manufacturer: Anritsu
Anritsu Demultiplexer is used with the ME522A Error Rate Measurement System. Key Specifications: High Speed Burst Signal Measure Pulse Width Measurement Totalizing Mask Function Processing Function
$625 USDFarmingdale, NJ
Anritsu MP9677B
- Manufacturer: Anritsu
- Model: MP9677B
The MP9677B is a combined E/O and O/E converter in the world that has 80MHz clock recovery bandwidth required for accurate jitter measurement at 10 Gb/s, as specified in the ITU-T O.172 standard. Three separate C...
$3,145 USDFarmingdale, NJ
Anritsu MU181500B
- Manufacturer: Anritsu
- Model: MU181500B
The MU181500B Jitter Modulation Source is a plug-in module for the Signal Quality Analyzer series. It generates the following jittered clocks for input and built-in clocks. External Jitter Connecting the output c...
$4,197 USDFarmingdale, NJ
Anritsu MD1230A Telecommunications Equipment
- Manufacturer: Anritsu
- Model: MD1230A
Good condition Anritsu MD1230A Telecommunications Equipment. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword