Used Anritsu General Analytical Equipment in New Jersey, USA

Anritsu Anritsu Test Equipment Racks 31inches(L) x 22inches(W) x 62inches(H)
- Manufacturer: Anritsu
As-is: Unit Sold AS-IS | Cal: Calibration Available
Farmingdale, NJ
Anritsu 3650
- Manufacturer: Anritsu
- Model: 3650
SMA/3.5 mm Calibration Kit Cal: Calibration Available | As-is: Unit Sold AS-IS
$6,950 USD
Get financing
Est. $136/mo
Farmingdale, NJ
Anritsu 3738A
- Manufacturer: Anritsu
- Model: 3738A
The Anritsu 3738A broadband test set is an instrument which measures the complex transmission and reflection characteristics of two-port devices in the frequency domain. It does this by sampling the incident sign...
$9,445 USD
Get financing
Est. $185/mo
Farmingdale, NJ
Anritsu 52126
- Manufacturer: Anritsu
YIG Oscillator 2-20GHz Used In Variation Of Anritsu 68XXX/69XXX Series
$1,312 USD
Farmingdale, NJ
Anritsu D27115
- Manufacturer: Anritsu
- Model: D27115
Coupler, 40 GHz Used In Variation Of Anritsu 68XXX/69XXX Series
$700 USD
Farmingdale, NJ
Anritsu MU181020A
- Manufacturer: Anritsu
- Model: MU181020
The MU181020A is a plug-in module that can be built into a Signal Quality Analyzer mainframe. It can generate a variety of patterns within the operating frequency range, including PRBS, DATA, Zero-Substitution, A...
$3,500 USD
Farmingdale, NJ
Anritsu MN938A
- Manufacturer: Anritsu
- Model: MN938A
The MN938A can set attenuation in a range of 0 to 60 dB in 0.1 dB steps. Two wavelengths can be selected. As the MN938A is provided with GPIB as standard, it can be used in a variety of automatic measuring system...
$761 USD
Farmingdale, NJ
Anritsu MP0130A
- Manufacturer: Anritsu
- Model: MP0130A
Anritsu MP0130A 2.5G Jitter Module MP1570A, MP1552B & MP1555B.
$2,573 USD
Farmingdale, NJ
Anritsu D27330
- Manufacturer: Anritsu
- Model: D27330
The 0.01 to 2 GHz Down Converter assembly contains a 6.5 GHz VCO that is phase-locked to the 500 MHz reference signal from the A3 Reference Loop PCB. The 6.5 GHz VCO's phase-lock condition is monitored by the CPU...
$897 USD
Farmingdale, NJ
Anritsu MU150018A
- Manufacturer: Anritsu
2.5G/10G Jitter Unit for MP1580A. The Anritsu MP1580A Portable 2.5G/10G Analyzer is a unique and powerful solution for analyzing jitter at the standard OC-48/192 or STM-16/64 bit rates. It can measure jitter of 2...
$2,048 USD
Farmingdale, NJ
Anritsu 3656B
- Manufacturer: Anritsu
The Anritsu Calibration kits contain all the precision components and tools required to calibrate your VNA or VNMS for 12-term error-corrected measurements in the connector style of your choice. Components are in...
$13,125 USD
Get financing
Est. $258/mo
Farmingdale, NJ
Anritsu MU150009A
- Manufacturer: Anritsu
- Model: MU150009A
Anritsu MU150009A 2.5G Tx/Rx module With 1550 wavelength. Model MU150009A fits the MP1570A SONET/SDH analysis platform. Specifications: Optical Input Power measurement Range: –30 to –9 dBm (peak power)
$2,450 USD
Farmingdale, NJ
Anritsu MU150125A
- Manufacturer: Anritsu
- Model: MU150125A
The 10/10.7G Jitter Unit (MU150125A) permits jitter generation and measurement from 52 Mbit/s to 10 Gbit/s supported by SDH/SONET. When Option 05 is installed, OTU-1 (2.66 Gbit/s) and OTU-2 (10.71 Gbit/s) jitter ...
$2,995 USD
Farmingdale, NJ
Anritsu MU150100A
- Manufacturer: Anritsu
- Model: MU150100
Model MU150100A Multirate Plug In Unit for use with the Anritsu MP1590B mainframe. The MU150110A is backwards compatible with the MU150100A, adding support for 11.1G (OTU1e, OTU2e) and 10.3G (10 GbE) interfaces t...
$4,995 USD
Farmingdale, NJ
Anritsu 36582KKF
- Manufacturer: Anritsu
- Model: 36582KKF
The module is controlled by a Personal Computer and appropriate software, a 37000 series Vector Network Analyzer (VNA) equipped with a serial interface and firmware version 3.23 or later, or any MS462XX VNMS. The...
$4,673 USD
Farmingdale, NJ
Anritsu MN938A General Analytical Equipment
- Manufacturer: Anritsu
- Model: MN938A
Good condition Anritsu MN938A General Analytical Equipment. Located in USA and other countries. Click request price for more information.
USA