Used Cnc Lathes

Trusted Seller
2010 HAAS ST-30
- Manufacturer: Haas
- Model: ST-30
10" 3 Jaw Hydraulic Chuck Chip Conveyor Automatic Tool Pre-Setter Turret Tool Holders Coolant System Manuals
Ohio, USA
Trusted Seller
OKUMA CADET LNC-8
- Manufacturer: Okuma
- Model: CADET LNC8
Chip conveyor 3-Jaw chuck Turret tooling as shown on turret Tailstock Manuals
Ohio, USA
Trusted Seller
2004 DOOSAN PUMA 240L
- Manufacturer: Doosan
- Model: PUMA 240
Used CNC Lathe, 22.4" swing, 25.5" machining length, 2-axis control. Equipped with Fanuc 21i-TB, 10" hydraulic chuck, tool presetter, mist collector, and more. Reliable power at 25 HP with max 3,500 RPM. Axis......
Ohio, USA
Trusted Seller
2019 HYUNDAI WIA SE2000PA
- Manufacturer: Hyundai - Wia
CNC Lathe, used. Max Turning Dia: 350 mm, Length: 280 mm, Chuck: 6", Spindle RPM: 6,000, Output: 11/15 kW, Torque: 52.5/92.5 N.m, X/Z Travel: 210/330 mm, Rapid: 24 m/min, 12 tools capacity. Max Turning Dia 350 mm...
Ohio, USA
Trusted Seller
1996 OKUMA IMPACT LU-45 1500
- Manufacturer: Okuma
- Model: IMPACT LU 45
- Spindle bore: 109.982 millimeter
CNC Lathe in used condition. Features 33.07" swing over bed, 78.74" between centers, dual turret with 22 tool stations, Okuma OSP7000L CNC control, and 21" chuck. . X-axis Travels: Upper Turret 17.32"/ Lower Turr...
Ohio, USA
Trusted Seller
2018 HAAS ST-30Y
- Manufacturer: Haas
- Model: ST-30Y
Used CNC Lathe with NextGen Control, a 10" hydraulic chuck, high-pressure coolant, and live milling at 6,000 RPM. Features include automatic tool presetter, tailstock, belt-type chip conveyor, and media display. ...
Ohio, USA
Trusted Seller
2006 NAKAMURA-TOME TW-20MM
- Manufacturer: Nakamura
- Model: TW-20MM
Used CNC Lathe: 20 hp, 5,000 RPM, 8.5" turning dia. Comes with Fanuc 18i-TB, twin spindles, live milling, collet chucks, barfeed interface, chip conveyor, and more. Maximum Bar Capacity Left Side / Right Side 2.5...
Ohio, USA
Trusted Seller
2013 DYNAPATH FB16
- Manufacturer: DYNAPATH
2013 ANNN YANG DY-410C X 1250 CNC Lathe, featuring a 49.2" distance between centers, 16.1" swing over bed, 3.15" spindle bore, and DynaPath FB16-49 control. Equipped with ground ballscrews, flood coolant, and a f...
Ohio, USA
Trusted Seller
2007 KINGSTON CL38C/3000
- Manufacturer: Kingston
7.1" spindle bore Chip Conveyor Control type: Fanuc Oi-TC | Swing: 26″ | Machining length: 120″ | Spindle speed: 1000 RPM | Chuck: 18″ | Equipped with: Chip Conveyor
Ohio, USA
Trusted Seller
1993 SUPERMAX YCM-TC2
- Manufacturer: Supermax
Swing: 18.89" | Machining length: 21.65" | # axis: 2 | Chuck size: 8" | Max rpm: 4,000 RPM | Turning dia: 9.84" | Tailstock: Yes | Control: CNC (Fanuc)
Ohio, USA
Trusted Seller
2000 HITACHI SEIKI HI-TECH TURN 23RIII
- Manufacturer: Hitachi Seiki
Swing Over Bed 17.7" Maximum Turning Diameter 13.38" Maximum Turning Length 23.6" Spindle Bore 3” Bar Capacity2.6" X Axis Travel 9" Z Axis Travel 24.8" Spindle Speed Range30 ~ 4,000 rpm Spindle Nose A2-8 Turret T...
Ohio, USA
Trusted Seller
HARDINGE CONQUEST T42SP
- Manufacturer: Hardinge
- Model: Conquest T42
Bar Feeder Swing: 21.2" | Machining length: 17.5" | # axis: 2 | Bar capacity: 1.625" | Power: 15 hp | Max rpm: 6,000 RPM | Tailstock: No | Live tooling: No | Sub spindle: No | Control: CNC (Fanuc)
Ohio, USA
Trusted Seller
2021 SUMMIT SC55-10X160M
- Manufacturer: Summit
- Model: SC55
Chuck Size 50" Bar Capacity 9" Spindle Speed 400 RPM Control Fagor 8055TC Distance Between Centers 227" Turret 8 Station Swing Over Bed 54.5" Swing Over Cross Slide 37" Motor 50 HP Power Requirement 440V Dimensio...
Ohio, USA
Trusted Seller
OKUMA CROWN L1060
- Manufacturer: Okuma
- Model: CROWN L1060
Swing: 21.65" | Machining length: 19.68" | # axis: 2 | Chuck size: 8" | Bar capacity: 2.2" | Power: 18 hp | Max rpm: 4,200 RPM | Turning dia: 10.63" | Tailstock: Yes | Live tooling: No | Sub spindle: No | Contro...
Ohio, USA
Trusted Seller
1997 HITACHI SEIKI HT-23SIII
- Manufacturer: Hitachi Seiki
- Model: HT23SIII
Imperial Metric Swing: 18" | Machining length: 23.6" | # axis: 2 | Chuck size: 10" | Bar capacity: 2.6" | Power: 20 hp | Max rpm: 20 RPM | Turning dia: 10" | Tailstock: Yes | Live tooling: No | Sub spindle: No | ...
Ohio, USA
Johnford ST130 CNC Lathe
- Manufacturer: Johnford
- Model: ST130
Good condition Johnford ST130 CNC Lathes manufactured in 2003. Located in USA and other countries. Click request price for more information.
USA