Used Processing in Flanders, Belgium

2005 HYMMEN KRP 1300 Sandwich panel press

• Manufacturer: Hymmen

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plat...

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

HERAEUS Drying equipment for stain and lacquer

• Manufacturer: Heraeus - Hanau - Vötsch

dryer with IR lamps Cross bar transport Working width 1300 mm length of transport: 11m Machine number: Year of construction:

2012 FIN S.R.L. CLN 1800 Sandwich panel press

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power ...

Drying equipment for stain and lacquer

Double Drying Rack 9 levels depth: 2 x 96 cm width: 90 cm height: 190 cm Machine number: Year of construction: Tension:

1971 JOSTING QFS 1300 Veneer pack guillotine

• Manufacturer: josting

Workpiece width 1300mm Max height input 80mm 2 hand controls Front or side operation selectable Motor power 5.5 hp

6-zak Stand-alone dust extractor

The number of sacks: 6 diameter 500 mm Motor: 4 kW Suction mouth: 250 mm. 24 filter sleeves Capacity: 4500 m³/h. Machine number: Year of construction:

1973 JOSTING EFS 3200 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 3200 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Motorised back fence With light beam

POLYBOIS RAV 32 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

1991 JOSTING EFS 2800 L Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2800 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Light beam security Motorised back fence

2017 THIES LUFT-ROTO PLUS

• Manufacturer: Thies

Jet THIES type LUFT-ROTO PLUS SII 140/2 "LFB", year of construction 2017, capacity 500kgs, 2 ropes, programmer SEDOMAT 5500.

1995 FISCHER+RÜCKLE FLA Glue spreader

• Manufacturer: Fischer

Automatic veneer pack edge glueing machine Veneer pack length: from 300 mm on Veneer pack width: 40 to 400 mm Veneer pack thickness: 10 to 80 mm Feed speed: 30 m/min Capacity, depending on pack length, ca. 3 to 4...

1987 JOSTING ZFS 2800 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2810 mm. Veneer pack thickness: 80 mm. Cutting width: 20 to 470 mm., 1 top knife, 1 bottom knife, simultaneous cutting Hydraulische pressure beam Power installed: 9 kW Preselection of 16 different...

ADAMIK CO. AP 300/130 Vacuum Press

Dimensions of the press: 3000 x 1300 mm. Useful dimensions: 2850 x 1150 mm. Standard vacuum pump: 12 m3/h, on request 25 m3/h or 40 m3/h Temperature: 50 - 60°C 3 mm thick membrane, 700% elasticity Medium heating ...