Used Processing in British Columbia, Canada

20' x 60' Roof Top Pull Chains (2 only)

• Manufacturer: Canadian Mill Equipment

- Five (5) runs of roof top chain c/w rollers on side - Approximately 50' long - Electric motor/reducer drive unit - Still installed

15' Double Screw Conveyor

- 15' x 36" wide - Dodge gear box - Motor removed

8" x 35' Screw Conveyor

- No drive

30" Troughing Conveyors - Bridge Type

- Approximately 7' wide x 7' high c/w catwalks - One (1) section 96' long - One (1) section 126' long - 30" wide troughing rolls (approx. 3'-9" c/c) - No drives - No head and tail pulleys

12" x 16' Belt Conveyor

- Fabricated steel trough 13" wide x 9" deep - Belt - Head and tail pulley - 5 HP electric drive

36" Conveyor

- Truss type - Covered with catwalk - c/w two (2) sets of drives & belt - 40'-0" sections - 500" feet available

36" x 45' Troughing Roll Conveyor

- Channel frame construction - Approx. 45' long (two sections) - 25 HP drive assembly (no motor) c/w head pulley - Tail pulley - Belt

36" x 29' Troughing Roll Conveyor

- Channel frame construction - Approx. 29' long - 15 HP drive assembly c/w head pulley - Tail pulley (loose) - Belt

CHIP FEEDER ALLIED 42 X 42

• Manufacturer: Allied

- Allied 42" x 42" - rubber tipped feeder - 10 HP gearhead drive - located in Vancouver, BC

Optimil Double Length Infeed - Side Shift and Skew

• Manufacturer: Optimil

- Built in 1999 - 4" to 20" diameter (was set up for 14" diameter) - 8' to 20' length - Base feed speed 300 FPM @ 60 hz - Main frame supported on two (2) roundway slides c/w linear positioners - Twelve (12) holdd...

Comact DDM10 Line

• Manufacturer: Comact

- 10 years old - Approx. 120' V-flite conveyor including drive and attached control devices - Flying log turner - new HD upgrade 2011-12? (Quad roll) - DDM10 full profile machine, 480 volt - All drive units, moto...

16" x 39" Roots High Pressure Blower

• Manufacturer: Roots

- Top in, bottom out - Inlet volume 46005 - Driver and driven poly chain pulleys c/w belt - No motor - Silencer and piping not included

SUTORBILT 713V-4500 BLOWER

- rebuilt

50 HP Low Pressure Blower

- 44" fan - Decent shape - 460 volt - Good for up to 20,000 CFM

Holman Screw Air Compressor

• Manufacturer: Holman

- 150 HP motor, 440 volt, 1770 RPM