Used Processing in Hiroshima, Japan

Aikosha ACM
- used
- Manufacturer: Aikusho
Agitator: spiral hook with control panel Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Mixing machine
- used
Startup board (inverter) Remarks. Dirty, but clean.
Hiroshima, Japan
2015 Aiko House MS-120 (Mighty S)
- used
- Manufacturer: Aikusho
Rotation speed: Any setting is possible with 80 to 320 rpm Increase in viscosity of slurry etc.
Hiroshima, Japan
1999 Noritake NR-120A
- used
- Manufacturer: Noritake
Ceramic roll Roll dimensions: φ120×450 Motor: 2.2kw Water-cooled, manual tightening Remarks One of three rolls is damaged. Need to replace with new parts.
Hiroshima, Japan
2005 Buhler SDW 800
- used
- Manufacturer: Bühler
Remarks. Ideal for dispersion Purchasing area: 60Hz | Quantity saved: 1
Hiroshima, Japan
1991 Inoue Manufacturing DV-300
- used
- Manufacturer: Inoue Manufactory
Motor: 3.7kw Material of wetted parts: SUS Container capacity: 330ℓ Hydraulic unit with spare tank x 1
Hiroshima, Japan
accumulator
- used
An accumulator is a pressure vessel (accumulator) that stores the energy of a liquid (oil, water, etc.). It works similarly to a "battery" in electricity. In electricity, electrical energy is stored in a storage ...
Hiroshima, Japan
M Technique Co., Ltd. CLM - 3.7S
- used
- Manufacturer: M Technique Co., Ltd.
Emulsifies and disperses multiple liquids that are difficult to mix under high temperature and pressure conditions. The closed container with a jacket has a capacity of 10 liters, a design pressure of FV to 0.8 M...
Hiroshima, Japan
350 L Cylinder vertical type
- used
Jacket (for hot and cold water, not steam) Homo mixer (3.7 kw)
Hiroshima, Japan
Unicar Industrial TM - GS
- used
- Manufacturer: Unicar Industries
Wetted part material: SUS Rotation speed: 13 to 120 rpm (RATIO: 15) Agitator lifting type (electric cylinder) Remarks Assembly required (Stand is missing)
Hiroshima, Japan
Hitachi, Ltd. Cylindrical vertical type
- used
- Manufacturer: Hitachi, Ltd.
Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat
Hiroshima, Japan
Showa Chemical Machine Cylinder Vertical
- used
- Manufacturer: Showa Chemistry Machinery
- Size: Outer diameter dimension: 650 φ × 750 H
Automatic chemical adjustment equipment with sanitary pump Jacket: Yes Agitator: No Shape: Top and bottom mirrors Remarks:Used in a major pharmaceutical plant
Hiroshima, Japan
1700L Cylindrical vertical
- used
- Size: Outer diameter dimension: 1050 φ × 2000 H
Wetted part material: SUS External dimensions: φ1050 x 2000H SS jacket Upper and lower mirrors, self-standing type Jacket: Yes Agitator: No Shape: Top and bottom mirrors
Hiroshima, Japan
2003 [YS Sten] Filtrate receiving tank (horizontal)
- used
- Manufacturer: Wyeth, Sten.
0.27 m3 Teflon coating inside Material: Gluing section SUS | Quantity saved: 1
Hiroshima, Japan
Iwai Machine Vertical cylindrical type
- used
- Manufacturer: Iwai Machinery
Material: SUS316L Purchasing area: 60Hz | Material: SUS 316 L | Quantity saved: 1
Hiroshima, Japan