Used Allis-Chalmers Crushers And Screening Plants

ALLIS CHALMERS 5 X 10 SINGLE DECK SKID MOUNTED

• Manufacturer: Allis-Chalmers

SKID MOUNTED ALLIS CHALMERS 5 X 10 SINGLE DECK WITH 2" PUNCH PLATE AND A 10HP ELECTRIC MOTOR

Allis-Chalmers 6x16

• Manufacturer: Allis-Chalmers
• Model: 6X16

Allis-Chalmers 6 x 16 2 Deck Incline Screen w/stand. S/N 09GA07743

ALLIS CHAMBERS 5 X 14 THREE DECK SCREEN

MODEL 5X14 TD5T, OIL BEARINGS TOP AND MIDDLE DECK ARE SIDE TENSION SCREENS, BOTTOM DECK -URETHANE, SPRINGS AND SPRING PADS

1995 ALLIS-CHALMERS ST RIPL-FLO

• Manufacturer: Allis-Chalmers

Allis Chalmers ST RIPL-FLO Single-axle Mobile Screen Unit, Set-up with double screen used for shingles at asphalt plant. 16' x 4' screen area, 30' conveyer. Unit is in good shape all conveyer belts in good condit...

1990 ALLIS-CHALMERS H3000

• Manufacturer: Allis-Chalmers

will come with all the pumps and is a complete unit. price includes load out.

1990 ALLIS-CHALMERS 30X42

• Manufacturer: Allis-Chalmers

Was used on a stationary plant. Ran out of material to crush. Unsure of year

ALLIS CHALMERS PORTABLE CONE CHASSIS 129001

• Manufacturer: Allis-Chalmers

Make: Allis Chalmers Model: Type: Cone Chassis Year: Allis Chalmers portable 3 axle chassis for AC 60″ cone (no cone). Set up for Allis Chalmers 6×16 3-deck screen (reference stock# 142000) with underconveyor. Go...

ALLIS CHALMERS 5X16 3-D 141156

• Manufacturer: Allis-Chalmers

Allis Chalmers 5×16 3-Deck ST RIPL FLO on 2-axle shop built chassis w/ 32’x30″ underconveyor, 20 degree idlers, 10HP motor on conveyor. Overall length: 32′. Overall height: 15′.

PORTABLE 3-AXLE CHASSIS FOR AC60″ ALLIS CHALMERS CONE 123001

• Manufacturer: Allis-Chalmers

PORTABLE 3-AXLE CHASSIS FOR AC60″ ALLIS CHALMERS CONE Portable 3 axle chassis for a AC 60″ Allis Chalmers cone. Was used for 6×16 3-deck AC screen. Good condition.

Crusher, Gyratory, 54" X 74", Allis Chalmers, #D737156

• Manufacturer: Allis-Chalmers

Allis Chalmers gyratory crusher, 54" x 74", manufactured in 1971. Features a 1-5/8" eccentric throw and comes with spare head, main shift with mantles, spare spider, and rock breaker for additional value.

Allis Chalmers 45 Hydrocone Crusher

• Manufacturer: Allis-Chalmers
• Model: HYDROCONE

Feed Opening: Closed side: 0.75in - 2in (19mm - 38mm) | Capacity: 195 TPH - 290 TPH | Size: 45in (1143mm) | Liners: Coarse Liners | General model specifications: Open Circuit | Rec. min discharge opening: 0.75in ...

Allis-Chalmers 5'x14' Triple Deck Incline Wet Screen

• Manufacturer: Allis-Chalmers

Allis Chalmers 5 Feet x 14 Feet Triple Deck Incline Wet Screen Electri Driven Spray Bars Wire Mesh Top Deck (1-1/4 Inch) Polyurethane Middle Deck (5/16 Inches) Polyurethane Bottom Deck (5 MM) Support Stand Direct...

48 x 74 in Allis Chalmers gyratory crusher

• Manufacturer: Allis-Chalmers

- 48 x 74 in (1.2 x 1.9 m) gyratory crusher - Removed and in storage - Disassembled for inspection and transport - Made in USA Machine specifications: - Requires 500 HP motor

60 x 109" Allis Chalmers Superior Gyratory Crusher

• Manufacturer: Allis-Chalmers

- 2 Available - 60 x 109 in. Gyratory Crusher - Manufactured by Allis Chalmers - Year: 1990 - Approximate Capacity: 5000 TPH - Liners recently replaced with more than 50% liner wear left - In good workin...

42 x 65 in Allis Chalmers Superior Gyratory Crusher, Mark I

• Manufacturer: Allis-Chalmers

- Mark 1 42x65 inch gyratory crusher - Manufactured in USA by Allis Chalmers - 400 HP GE motor - Motor and crusher sheave - Lubrication system with tank, pump, and heat exchanger - Lot of associated spare parts a...