Used compacteren in Bremen, Germany

800 Liter Container, Aisi 304

Volume: 800 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.000 mm | Total height: 1.530 mm | Manhole: in the upper bottom (Ø 400) | Technical equipment: butterfly valve | Outlet: DN50 DIN...

800 liter pressure container, Aisi 304

• Manufacturer: Stöcklin

Volume: 800 liter | Vacuum: 0,15 bar | Max. excess pressure: 1,0 bar | Lower bottom: cone shaped bottom | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 990 mm | Cylindrical height: 710 mm | Total ...

1000 liter round container, Aisi 304

remarks: 3-legged frame made of V2A; 1 container with small dents

1000 Liter IBC Container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (galvanized); 1 additional manhole cover with built-in Liquifant; small dents in the upper bottom (see photos)

500 liter IBC container, AISI304

• Manufacturer: Thielmann (UCON)

remarks: Frame, Fe (galvanized; slight signs of corrosion, partly slightly bent); small dents possible; partly slight adhesions inside the container

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

1251 liter IBC container made of stainless steel 316

• Manufacturer: Azzini

remarks: Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however...

1000 liter container, Aisi 316

• Manufacturer: BSI Biemont Soneco Industries

remarks: Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed in...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

1000 Liter heat-/coolable container, Aisi 304

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Frame, Fe (galvanized); double jacket must be filled with heat transfer oil on site for heating; this is he...

1070 liter heat-/coolable container, Aisi 304

• Manufacturer: Behälter KG Bremen

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate remarks: Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the out...