Used Electrical Test Instruments in Dublin, Ireland

Keysight (Agilent) N9048B
- used
- Manufacturer: Agilent - Keysight
Details Keysight (Agilent) N9048B 1Hz to 44GHz PXE EMI Test Receiver Description: Frequency Range: 1 Hz to 44 GHz Maximum Analysis Bandwidth: 40 MHz Maximum Real-Time BW: 350 MHz DANL @1 GHz: -174 dBm Fully CISPR...
Dublin, Ireland
Keysight (Agilent) N9038B
- used
- Manufacturer: Agilent - Keysight
Details Keysight (Agilent) N9038B 3Hz To 44GHz Mxe EMI Test Receiver Description: Frequency Range: 3 Hz to 44 GHz Maximum Analysis Bandwidth: 160 MHz Maximum Real-Time BW: 160 MHz DANL @1 GHz: -174 dBm Perform EM...
Dublin, Ireland
NoiseKen FNS-AX3-B50
- used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AX3-B50 is an advanced Fast Transient Burst Simulator designed for complance testing in accordance with IEC61000-4-4 edition 2. This unit features Pulse Outputs up to 4.8 kV at 2 MHz Puls...
Dublin, Ireland
Emco 3810/2 SH
- used
- Manufacturer: Emco
Details The EMCO 3810/2 SH Single Phase LISN (Shuko Connector) operates over a frequency range of 9 kHz to 30 MHz, supporting a continuous current rating of 10 A. It features two lines (L+N) plus a ground-switche...
Dublin, Ireland
Keysight Technologies 8546A
- used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 8546A EMI Receiver, composed of the 85462A RF Section and 85460A RF Filter Section, is a CISPR 16-1 compliant system for precise EMI testing from 9 kHz to 6.5 GHz. It enables confor...
Dublin, Ireland
emtest UCS500N5
- used
- Manufacturer: emtest
Details emtest UCS500N5 The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic sta...
Dublin, Ireland
Haefely PIM120
- used
- Manufacturer: Haefely
Details Haefely PIM120 (call for availability) The Haefely PIM120 Impulse Module is used with the PCD120 to test telecom systems using the 10/700us impulse (also called telecom impulse). This impulse is character...
Dublin, Ireland
Haefely PCD120
- used
- Manufacturer: Haefely
Details Haefely PCD120 The Haefely PCD120 CDN, as part of the PSURGE 8000 system is tailored to meet the ITU and IEC requirements for 2 & 4 wire interfaces. It allows the selection of both the required resistors ...
Dublin, Ireland
Haefely PSURGE 8000
- used
- Manufacturer: Haefely
Details RENT Haefely PSURGE 8000 (call for availability) The Haefely PSURGE 8000 Surge Platform Test System is a modular expandable system that grows with your application needs. The modular concept is built arou...
Dublin, Ireland
Emco 3816/2 SH
- used
- Manufacturer: Emco
Details The Emco 3816/2 SH single-phase Line Impedance Stabilization Network (LISN) covers 9 kHz to 30 MHz with a 16 A continuous current rating, featuring two lines (L+N) plus ground, Shuko connectors, a switche...
Dublin, Ireland
EMC Partner TRA2000
- used
- Manufacturer: EMC
Details The EMC Partner TRA2000 Transient Test System offers full compliance CE Mark and ANSI transient test solutions. A choice of 4kV or 6kV SURGE generators with Combination, 100 kHz Ring, and 10/700 waves plu...
Dublin, Ireland
Haefely PIM100
- used
- Manufacturer: Haefely
Details Haefely PIM100 The Haefely PIM 100 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power line...
Dublin, Ireland
Haefely PCD130
- used
- Manufacturer: Haefely
Details Haefely PCD130 The Haefely PCD130 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations...
Dublin, Ireland
EMCO 3810/2
- used
- Manufacturer: Emco
Details Emco 3810/2 The Emco 3810/2 Line Impedance Stabilization Network is a twochannel low pass filter network designed to isolate the equipment under test from an external power source while steering any radio...
Dublin, Ireland
Haefely PCD300
- used
- Manufacturer: Haefely
Details Haefely PCD300 The Haefely PCD300 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations...
Dublin, Ireland