Used compacteren in Chihuahua, Mexico

24" WIDE HELICAL HEAD BRUSH

• Manufacturer: Titan

2EX-XP124T - 24" WIDE PLANER - 15 HP MOTOR - TITAN - SPIRAL HEAD 2EX-XP124T - 26" WIDE PLANER - 20 HP MOTOR - TITAN - SPIRAL HEAD New with warranty VECTOR® Helical Brush Head Features: VECTOR or straight knife cu...

43" RECIPROCATING

• Manufacturer: amxmachinery.com

PART # 2TA-TS-HACDE - RECIPROCATING - 43" WIDE New with warranty Auto Clean Flat-Line Spray Machine A. Machine Size L6442 x W3700 x H2700mm B. Conveyer 1 lot - Loading Conveyer Belt & roller type - Spray Conveyer...

WIDE BELT SANDER - 43" WIDE - 2 BELTS

PART: 2NT-8-1100RC - WIDE BELT SANDER - 43" WIDE - 2 BELTS WIDTH - 2 BELTS NEW WITH WARRANTY - Configuration: Roller-Combination Head * 1st Head 8" 65 Shore Rubber Contact Drum * 2nd Combination Head with 4" rubb...

16'' X 40'' LATHE

TORNO 14'' X 40'' PARTE: 2GM-GML-1440HD The 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully equipped with a Taper Attachment, 8” 3-jaw chuck with one ...

HORIZONTAL RESAWING MACHINE - 1 SAW - WIDTH 12" - RESAWING MACHINE - RETURN MACHINE

PART: 2FA-RE6X12 - HORIZONTAL RESAW - 1 SAW - WIDTH 12" - NEW WITH WARRANTY NEW WITH WARRANTY The widest cutting resaw available in our line of products. If your looking for a low cost solution to cutting up to 1...

HP-EMA-300 - NODDING MACHINE - CONTINUOUS CHISEL AND DOWEL FOR BOARDS AND FLOORS - 40-300 MM WIDE

PART: 3HP-EMA-300 - NODDING MACHINE - CHISEL AND CONTINUOUS DOWEL FOR BOARDS AND FLOORS - 40-300 MM WIDTH N New with warranty Specification: 2.Max. / Min. Thickness: 10mm / 35mm 6.Cutterhead Spindle Motors: 5-1/2...

2008 VERTICAL SLIDING TABLE SAW - HOLZHER 1265 SUPER CUT

• Manufacturer: Holz-Her
• Model: 1265S

VERTICAL SLIDING TABLE SAW - HOLZHER 1265 SUPER CUT USED - VERY GOOD CONDITION Electric: 230 Voltage 60 Cycle 3 Phase Holz Her Vertical Panel Saw Specifications: Main motor 4 HP Depth of cut 2" max Scoring unit w...

2AA-H550EII - BAND SAW - 21.6" CAPACITY

PART: 2AA-H550EII - BAND SAW - 21.6" CAPACITY - AMADA CAPACITY 21.6" - AMADA NEW WITH WARRANTY Machine Specifications Cutting Capacity Round (Diameter) 7.87"-18.90" Rectangle (W x H) 21.65" x 18.90" Work Load Cap...

QM-R-RCGS - 1 AND 2 SIDE GUMMING MACHINES - 24", 48" AND 63" WIDE

• Manufacturer: amxmachinery.com

R-RCGS-1-24-1.75 - GUMMING MACHINE - 1 SIDE - WIDTH 24" - 1.75" OPENING R-RCGS-1-24-1.75 - GUMMING MACHINE - 2 SIDES - 24" WIDE - 1.75" OPENING - 1.75" - 1.75" OPENING 1.75" OPENING R-RCGS-1-48-1.75 - GUMMING MAC...

PART: AMX-10170 - ELECTRIC MOTOR - 15 HP, 230/460 V, 3550 RPM - TECHTOP BRAND

• Manufacturer: TECHTOP

PART: AMX-10170 - ELECTRIC MOTOR - 15 HP, 230/460 V, 3550 RPM - BRAND TECHTOP USED - VERY GOOD CONDITION - LIKE NEW NEW BEARINGS - FAG BRAND PPROVED FLANGE CONNECTION 15 HP 230/460V 3 PHASES 33.1/16.9 AMP DIMENSI...

COPY LATHE 1100 MM

PART # 1RF-THTOCBACO - COPYING THRONE 1.10 MTS. Manufactured in steel and grey iron, high resistance frame with base. Fully concealed pulleys and belts with 3 quick change speeds allowing for a variety of operati...

PART: AMX-10079 - 45 DEGREE DOUBLE SAW - 2 X 10" DIAMETER SAWS - CTD D-45

PART: AMX-10079 - DOUBLE SAW 45 DEGREES - 2 SAWS 10" DIAMETER - CTD D-45 USED - VERY GOOD CONDITION 2 small pistons on the sides that are activated before the saws go up and down, so that the material to be cut d...

PART: 2TP-010-E - PALLET STACKER - FROM 30X30 INCHES TO 50X48 INCHES

PART: 2TP-010-E - PALLET STACKER - FROM 30X30 INCHES TO 50X48 INCHES New with warranty Photos & Features: Standard machine for pallets 30 x 30 inches up to 50 x 48 inches Machine for pallets of 3, 4 and 5 bars. C...

2005 CATERPILLAR CS-563E

• Manufacturer: Caterpillar
• Model: CS-563E

2015 VOLVO SD115

• Manufacturer: Volvo
• Model: SD115
• HP: 100.577 horsepower
• Operating weight: 12,050 kilogram