SC08 (#25064) - Mold Side Curtain
used
Mold Side Curtains provide a means of confining molded parts on multi-cavity molds that have a tendency to fly out the sides, thus reducing the risk of contamination, loss or damage. Velcro permits easy opening o...
$150 USDWoodstock, IL
SC07 (#25063) - Mold Side Curtain
used
Mold Side Curtains provide a means of confining molded parts on multi-cavity molds that have a tendency to fly out the sides, thus reducing the risk of contamination, loss or damage. Velcro permits easy opening o...
$137 USDWoodstock, IL
SL28 (#25068) - Split Leg Chute
used
Split Leg Separation Guideskirt - Very inexpensive means of maintaining part separation from the mold to receptacles directly below the mold.
$153 USDWoodstock, IL
MS27 (#25039) - Soft Chute
used
Typical applications are conical or spherical shaped small parts below 200 degrees. All Guideskirts are made of soft pliable gray bondcote material, which protects delicate parts from surface damage and can withh...
$133 USDWoodstock, IL
MS17 (#25038) - Soft Chute
used
Typical applications are conical or spherical shaped small parts below 200 degrees. All Guideskirts are made of soft pliable gray bondcote material, which protects delicate parts from surface damage and can withh...
$120 USDWoodstock, IL
FR01 (#25027) - Front/Rear Chute
used
Dual Soft Chute Guideskirt (Front/Rear Exit) - When clearance between the machine frame and base is limited this chute offers the solution to part separation on family molds where applicable.
$194 USDWoodstock, IL
FR02 (#25028) - Front/Rear Chute
used
Dual Soft Chute Guideskirt (Front/Rear Exit) - When clearance between the machine frame and base is limited this chute offers the solution to part separation on family molds where applicable.
$226 USDWoodstock, IL
MTP31 (#25050) - Tapered Chute
used
The Tapered Guideskirt design allows parts to funnel or align below the mold for ease of packaging or secondary processing. Fabric can be easily cut to permit front, rear, side or bottom release in conjunction wi...
$123 USDWoodstock, IL
MTP11 (#25048) - Tapered Chute
used
The Tapered Guideskirt design allows parts to funnel or align below the mold for ease of packaging or secondary processing. Fabric can be easily cut to permit front, rear, side or bottom release in conjunction wi...
$99 USDWoodstock, IL
MST12 (#25043) - Straight Chute
used
The Standard Straight Guideskirt - Ideal for guiding large parts or runners from the mold to a receiving source directly below the mold. Multiple units can be used to guide parts and runners to desired locations.
$95 USDWoodstock, IL
WSL03 (#25072) - Walking Split Leg Chute
used
Split Leg Guideskirt (Walking) Off-set legs permit directing parts into separate lanes on conveyors.
$200 USDWoodstock, IL
WSL04 (#25073) - Walking Split Leg Chute
used
Split Leg Guideskirt (Walking) Off-set legs permit directing parts into separate lanes on conveyors.
$214 USDWoodstock, IL
MAG01 (#25571) - Magnet Kit Mounting Option
used
Kit Includes: 4 - 2 3/4” diameter magnets, 70 lb pull force 4 - Hook screws 4 - 10-24 Nyloc nuts 4 - 10-24 Flat nuts 4 - #10 Washers, Lock
$30 USDWoodstock, IL
SC03 (#25059) - Mold Side Curtain
used
Mold Side Curtains provide a means of confining molded parts on multi-cavity molds that have a tendency to fly out the sides, thus reducing the risk of contamination, loss or damage. Velcro permits easy opening o...
$86 USDWoodstock, IL
SC01 (#25057) - Mold Side Curtain
used
Mold Side Curtains provide a means of confining molded parts on multi-cavity molds that have a tendency to fly out the sides, thus reducing the risk of contamination, loss or damage. Velcro permits easy opening o...
$60 USDWoodstock, IL
Tip: Enter manufacturer, model or keyword