Used Machining Centers in South Korea

MB-46V

The machining accuracy of workpieces varies greatly due to temperature changes around the machine, heat generated by the machine, and heat generated during machining. The Thermo-Friendly Concept is a unique way o...

ace centermf-46va/b

MILLAC 468V Ⅱ

The bed and column have a strong structure with optimally located ribs to prevent chatter and warping during heavy cutting. The sliding surface utilizes the traditional angular guide method on the entire axis to ...

MILLAC 44V II

[new] mu-400v ⅲ

Okuma has named its machine tools "Green-Smart Machines" for their ability to autonomously achieve high productivity with both high accuracy and low energy consumption, and together with our customers, we are con...

MU-4000V

The B axis of the trunnion table is equipped with a roller gear cam with high rigidity and suitable for high-speed operation, and the C axis is equipped with a direct drive motor that generates high torque even a...

MU-5000V

Highly rigid, double-end supported trunnion table Ballscrew cooling (standard) for high degree of accuracy and high followability Indexing accuracy A-axis index accuracy/index return accuracy: ±0.68 sec/±0.40 sec...

MU-S600V

MCV-AII

MCR-AF

The spindle is a ram-type structure with a large cross-sectional area of 350×350 mm, so it is rigid enough for powerful cutting. The Z axis is controlled by double ball screws driven from both sides of the ram. H...

Exeron HSC-500 yr 2016 2 table

• Manufacturer: Exeron

little used mint condition high speed machining center with 2 changing table, 1 index Axes : 3 Control : HEIDENHAIN iTNC 530 Dimensions (long x wide x high) : 3.250 x 2.100 x 3.000 mm Max. spindle speed : 42...

MULTUS U3000

Wide machining envelope optimized for complex, heavily milled parts. Highly rigid column movable structure that can fully utilize the class-leading Y-axis stroke enables powerful machining with high accuracy alon...

Automated systems

Depending on the machining machine you use, the automation equipment you need to adopt will vary depending on the lathe or machining center. Also, depending on the number of lots and types of workpieces, the prod...

VTM-1200YB

Spindle structure for unbalanced workpieces Spindle bearing: VTM-2000YB ø260 mm VTM-2000YB ø200 mm + thrust bearing ø650 mm Loaded mass: VTM-1200YB 3,000 kg (including chuck) VTM-2000YB 5,000 kg VTM-2000YB 10,000...

Doosan DNM 500 II Machining Center

• Manufacturer: Doosan
• Model: DNM 500 II

Good condition Doosan DNM 500 II Machining Centers available between 2012 and 2015 years. Located in United Kingdom and other countries. Click request price for more information.