- Trusted Seller
Alba UVHY300
- Manufacturer: Alba
Alba UVHY300 Max sheetwide: 300 mm | Max sheetthickness: 3 mm | Power: 7.5 kW | Length: 1350 mm | Depth: 700 mm | Hight: 1200 mm | Weight: 650 kg
Deinze, Belgium - Trusted Seller
ALBA ECAV 16
- Manufacturer: Alba
ALBA ECAV 16 Straightener hyperbolic rotor coils made of iron in the straight bars from a hyperbolic rotor from 6 mm to 12 mm. The cutting system to cut iron straightening without interrupting amentando duty cy...
Malaga, Spain - Trusted Seller
ALBA C42L
- Manufacturer: Alba
ALBA C42L Shears for cutting longitudinal bars up 42mm diameter (450N/mm.2.). Body monoblock casting. Cutting through pedal drive and side lever. Self-lubricated gears. Interchangeable cutting blades (8 edges). E...
Malaga, Spain - Trusted Seller
ALBA C32L
- Manufacturer: Alba
ALBA C32L Shears for cutting longitudinal bars up 28mm diameter (450N/mm.2.). Body monoblock casting. Cutting through pedal drive and side lever. Self-lubricated gears. Interchangeable cutting blades (8 edges).
Malaga, Spain - Trusted Seller
ALBA CRM 35
- Manufacturer: Alba
- Model: CRM 35
ALBA CRM 35 Shears for cutting longitudinal bars up 32mm diameter (400N/mm.2.). Body monoblock casting. Cutting through pedal drive and side lever. Self-lubricated gears. Interchangeable cutting blades (8 edges)....
Malaga, Spain - Trusted Seller
ALBA CRM 45
- Manufacturer: Alba
ALBA CRM 45 Shears for cutting longitudinal bars up 40mm diameter (400N/mm.2.). Body monoblock casting. Cutting through pedal drive and side lever. Self-lubricated gears. Interchangeable cutting blades (8 edges)....
Malaga, Spain - Trusted Seller
ALBA DAR 55
- Manufacturer: Alba
ALBA DAR 55 Maximum bending diameter 45mm at 650N / mm² Two speed New electrical panel Double pedal actuation
Malaga, Spain - Trusted Seller
ALBA DAR 36 L
- Manufacturer: Alba
ALBA DAR 36 L turntable forward and reverse rotation The table can turn in two directions of operation. angles selector Desired angle is obtained by inserting the pin in the bending table periphery. two drive s...
Malaga, Spain - Trusted Seller
ALBA DAR 45 P
- Manufacturer: Alba
ALBA DAR 45 P Three working systems. Automatical programmation. 300 possible shapes, with 10 angles each, storables. Angles corrector. Counter of bent pieces. Manual selection of angles, by means of pins. Continu...
Malaga, Spain - Trusted Seller
ALBA CRM 35 SHEAR
- Manufacturer: Alba
ALBA CRM 35 shears inspected by our technical team. Consult us for shipping conditions. 8-edge blades. One-piece cast steel body. No lubrication points. Low-cost, minimal maintenance. Long machine life (30-40 yea...
$5,094 USDZaragoza, Spain - Trusted Seller
ALBA CRM-40 SHEAR
- Manufacturer: Alba
ALBA CRM-40 shears, inspected by our technical team. Contact us for more details on pricing and shipping terms. ALBA CRM-40 shears, inspected by our technical team. Cutting capacity: 650 N/mm2 steel bars: 1 bar, ...
Zaragoza, Spain - Trusted Seller
ALBA DAE 16 stirrup bender
- Manufacturer: Alba
ALBA stirrup bender, model DAE 16. 2 units available. Immediate availability. Contact us for shipping terms. ALBA DAE 16 stirrup bender. Alba's manual stirrup bender machines are used for making stirrups, whose d...
$3,157 USDZaragoza, Spain - Trusted Seller
Electric shear ALBA CMR-20
- Manufacturer: Alba
Working range: Rounds: ø 8 – 20 mm. Squares: 8 – 18 mm. Flats: 30x6 - 30x11 mm. | Tension: 380 V. - 50 Hz.
Udine, Italy 
ALBA DAR 35 BENDER
- Manufacturer: Alba
Great efficiency and quality of work due to: Two bending speeds (the fast one for small diameters). Pre-setting of 3 different angles. Lower-able lateral rollers. Four slid able rulers for better service and accu...
Pontevedra, Spain
2007 ALBA DAE 16
- Manufacturer: Alba
Stirrup bender ALBA DAE 16 Alba's manual stirrup bending machines are used for the production of stirrups, whose diameters do not usually exceed 12 mm. They are therefore smaller than conventional stirrup bending...
Pontevedra, Spain
Tip: Enter manufacturer, model or keyword