Used Processing in Japan

Trusted Seller
2001 MITSUBISHI 3500MMⅢ-1100
- used
- Manufacturer: Mitsubishi
Screw dia: 200mm | Shot volume: 31400cm3 | Platen size: 2550mm x 2450mm | Distance between tie rods: 2000mm x 1800mm | Max daylight: 3700mm | Max clamp stroke: 2700mm | Mold thickness: 1000~1900mm | Shipping mas...
Chiba, Japan
Trusted Seller
2016 AIRMAN PDS670SD-4C5
- used
- Manufacturer: Hokuetsu Kogyo
Hours: 3531H | Specification: 0.7MPa.TRAILER TYPE
Chiba, Japan
Trusted Seller
2005 TOSHIBA IS850GT-81A
- used
- Manufacturer: Toshiba
- Model: IS850
Screw dia: 105mm | Shot volume: 4320cm3 | Distance between tie rods: 1060x1060mm | Platen size: 1530x1530mm | Daylight opening: 2250mm
Chiba, Japan
Trusted Seller
2005 NIIGATA ALL ELECTRIC MD450S-IV
- used
- Manufacturer: Niigata
- Model: MD450
Screw dia: 76mm | Shot volume: 1588cm3 | Distance between tie rods: 810x810 | Daylight opening: 1550mm
Chiba, Japan
Trusted Seller
1999 AIRMAN PDSK900S
- used
- Manufacturer: HOKUETSU
Hours: 5977H | Specification: ENGINE: S6B3
Chiba, Japan
Trusted Seller
2005 MITSUBISHI 650MMGW-110
- used
- Manufacturer: Mitsubishi
Screw dia: 90mm | Shot volume: 3140cm3 | Distance between tie rods: 1050x1050 | Mould thickness: 450x950 | Daylight opening: 1800mm
Chiba, Japan
Trusted Seller
2016 denyo dca-25lske
- used
- Manufacturer: Denyo
- Model: DCA-25LSKE
Hours: 5650H | Specification: 20.0/25.0KVA. ENGINE: V2403
Chiba, Japan
Trusted Seller
2015 NISSEI FNX140Ⅲ-36A
- used
- Manufacturer: Nissei
Screw dia: 50mm | Shot volume: 353cm3 | Distance between tie rods: 510x510
Chiba, Japan
Trusted Seller
1996 TADANO LS-106A
- used
- Manufacturer: Tadano
- Model: LS-106A
We accept repainting. Please feel free to contact us if you have a request for replacement or repair of this machine or parts.
Chiba, Japan
Trusted Seller
CKD GX5211D-AC200V
- used
- Manufacturer: SDK
Machine Specifications Comments from Sales Maintenance situation: Present condition delivery
Tokyo, Japan
Trusted Seller
2004 markem corporation 590t
- used
- Manufacturer: Markem
- Model: 590T
Machine Specifications Desktop Silicon Pad Printing Machine Comment from Sales
Tokyo, Japan
Trusted Seller
2003 Hitachi Industrial Equipment Systems SRL-3.7DA5
- used
- Manufacturer: Hitachi
- Model: SRL-3.7DA5
Machine Specifications ○ Power source Three-phase 200V [for 50Hz] Oil-free/low noise/scroll type ○ Capacity Output 3.7kw, Max. pressure 0.83MPa Discharge air volume 400L/min Ambient temperature 5～40°C Noise level...
Tokyo, Japan
Trusted Seller
2021 Hitachi Industrial Equipment Systems ST-230C
- used
- Manufacturer: Hitachi
- Model: ST-230C
Machine specification ○ Capacity Capacity 230L Pressure 1.02MPa Receiver tank of standing type. Comment from sales representative The tank was used in an indoor research facility. Manufactured in 2021.
Tokyo, Japan
Trusted Seller
2021 Hitachi Industrial Equipment Systems SRL-11DMNA5
- used
- Manufacturer: Hitachi
- Model: SRL-11
Machine Specifications Low noise scroll type oil-free dryer built-in package type ○ Configuration Main unit SRL-5.5CB Dryer HDP-110A ○ Capacity Output 5.5x2 kW 3-phase 50Hz Maximum pressure 0.8MPa Blowing volume ...
Tokyo, Japan
Trusted Seller
2000 Tank unit for Nissin Koki NVG750TH
- used
- Manufacturer: Nichinjoh Koki
Machine Specifications ○ Unit set contents 1) Mag Separator (2) Small tank (3) Centrifuge (4) Coolant tank (4 sets) Details of each part of the unit (1) Mag separator Magnetic separator made by Noritake F-120 typ...
$1,865 USD
Tokyo, Japan