Building Filters

Used Centrifugal Separators in Hiroshima, Japan

Tanabe Wiltec TOP-48-80
- Manufacturer: Tanabe Wiltech
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
1989 Tanaka Giken Industry AE 55 × 22
- Manufacturer: Giken
55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Alfa Laval SSG509
- Manufacturer: Alfa-Laval
Power: 3.7KW 200V Rotation speed: 1800rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Wet part: SUS M...
Kure, Japan
1989 Matsumoto Machinery Works MARK III 48 × 30
- Manufacturer: Matsumoto Machinery Works
Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G
Hiroshima, Japan
Tikara Engineering 60 × 25 1/2 type
- Manufacturer: Tikara Engineering
Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...
Hiroshima, Japan
There is no nameplate 24 吋
- Manufacturer: No nameplate
Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...
Hiroshima, Japan
1985 Matsumoto Kikai MARK III 48×36
- Manufacturer: Matsumoto Machinery
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
1999 Tanabe Wiltec O-24
- Manufacturer: Tanabe Wiltech
Top discharge type 24" Explosion-proof Rotation speed: 1,950 rpm Capacity: 40L
Hiroshima, Japan
2000 Tanabe Wiltech DAC-30
- Manufacturer: Tanabe Wiltech
30-inch, fully automatic, explosion-proof Rotation speed: 1,310 rpm Capacity: 45L
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
1988 Tanabe AUT - 42
- Manufacturer: Tanabe
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: Kyoritsu Seisakusho
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
Tanabe 42-inch
- Manufacturer: Tanabe
42", top discharge type, perforated type. Basket SUS, others SS.
Hiroshima, Japan