Used Materials Testing in Germany

+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PRP
- Manufacturer: Georg Fischer
Standard test cylinder production by vibratory pressing, pressing pressure 1 kp/cm²
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPE
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
TIDE JWM 220
- Manufacturer: Tiede
Yoke magnetization for surface/weld seam testing, movable attachment poles, connected loads 230 V, 50/60 Hz, 2.4/1.7 A
Meinerzhagen, Germany
BNIF plates
Product information "BNIF plates" Comparison plates for testing surface roughness in accordance with EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case
$1,461 USD
Münster, Germany
Scrata plates - 48 pieces -
Product information "Scrata plates - 48 pieces -" Comparison plates for testing surface quality in accordance with DIN EN 1370 The set is composed as follows:- Surface roughness (1-5) - Surface inclusions (1-5) -...
$4,552 USD
Münster, Germany
MINITEST digital coating thickness gauge with integrated probe TT 230
- Manufacturer: Unknown
TT 230 Highlighted Features: This N type Probe measures the thickness of nonmagnetic coatings on non-magnetic metals. It is used on the films of anodizing, varnish, paint, enamel, plastic coatings, powder, etc. a...
$584 USD
Münster, Germany
Layer thickness measuring device DLT 400
- Manufacturer: Unknown
Coating Thickness Gauge DLT 400 for measuring coatings on FE / NFE substrate surfaces Scope of delivery:
Münster, Germany
Karl Deutsch Pocket Leptoscope 2025
- Manufacturer: Unknown
Karl Deutsch Pocket Leptoscope 2025 (layer thickness measuring device); second hand
$768 USD
Münster, Germany
MINITEST digital coating thickness measuring device with integrated probe TT 220
- Manufacturer: Unknown
TT 220 Coating Thickness Gauge Integrated probe F, Measuring method: magnetic induction
Münster, Germany
Illumination device, Allen-Vanguard VIP 2
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 2" Illuminator, Allen-Vanguard VIP 2 - Small illuminator LP 2/75 (2.0 mm x 75 mm) - Mirror clamp (2.0 mm/ length 75 mm) - 1 x replacement lamp 2 W - Case with ...
$535 USD
Münster, Germany
portable hardness tester novotest T-UD3
Product information "portable hardness tester novotest T-UD3" portable hardness tester novotest T-UD3 with a probe (optional UCI or Leeb) 1kgf (9.8N),, 5kgf (49N), 10kgf (98N) Leeb probe types D, DC, DL, C, D...
$3,389 USD
Münster, Germany
Slip cross magnet 42 volts
Product information "Helling cross magnet 42 Volt" Helling cross magnet on rollers completely overhauled // - newly potted - ideal testing device for simultaneous longitudinal and transverse fault testing! requir...
$1,163 USD
Münster, Germany
Inspector UV flashlight
Product information "Inspector UV rod lamp" Inspector UV flashlight with Milwaukee charger Safety goggles in case
$583 USD
Münster, Germany
UV lamp Labino TrAC Pack 12-24 V pro
Product information "UV lamp Labino TrAC Pack 12-24 V pro" UV lamp Labino TrAC Pack 12-24 V PRO (with power supply unit)
$1,689 USD
Münster, Germany