Used in Hiroshima, Japan

2001 [Kurita Machinery Corporation] Filter press
- Manufacturer: 栗田機械製作所
Closed delivery / Hydraulic tightening type. New hydraulic unit required. 500 square x 12 chambers (filtration area approx. 7-8 m2 or so).
Hiroshima, Japan
2007 ADVANTEC STH426FA
- Manufacturer: ADVANTEC
Capacity: 98L, Max. pressure: 0.19MPa Sterilization temperature control range: 105-128°C Sterilization timer: 1 to 250 minutes
Hiroshima, Japan
1991 Mitsubishi Kakoki SJ-30T
- Manufacturer: Mitsubishi Kako Corporation
1 set of new spare parts available Disassembly tool is available
Hiroshima, Japan
Tomoe Kogyo P-3400
- Manufacturer: Tomoe kogyo
3650rpm / approx. 3000G. Gear ratio 1/165. Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
1997 Lhasa Industry ATS 600 DS
- Manufacturer: Lhasa Industry
Argyre shifter Material of powder contact part: SUS Motor: 0.4kw The oscillating mechanism is more efficient than the vibrating type. The sifting particles do not bounce on the mesh surface as they do in the vibr...
Hiroshima, Japan
Reaction can 5000L
Material: Wetted parts SUS304. Drive unit is removed and placed separately.
Hiroshima, Japan
[New Stock] Made in Korea 800Ø IDTS800-1
- Manufacturer: IDTS800-1
Available in two different configurations. [In stock] Cassette type Material of contacting parts: SUS304 Frame material: SS400 Frame diameter: 800 Motor: 0.75kW Tapping ball: φ30 Made of silicone This manufacture...
Hiroshima, Japan
Tanabe AT-48
- Manufacturer: Tanabe
Wetted parts material: Cage part SUS316. Casing part: inner rubber lining / outer wall SS 48-inch fully automatic bottom discharge type. Capacity 225L Equipped with control panel and hydraulic unit. Low speed ope...
Hiroshima, Japan
2007 IHI IX-36T
- Manufacturer: IHI
Rotation speed 3150 rpm (centrifugal effect 2000G) Gearbox GT-2X (1/88) With soundproofing box Gross weight of main body 2300kg
Hiroshima, Japan
2007 Sekko Sangyo SSR150
- Manufacturer: Seikou Sangyo
18.6m3/min, 55kpa Power: 30kw | Purchasing area: 60Hz | Quantity saved: 3 units
Hiroshima, Japan
2006 uzax 1050l
- Manufacturer: yooxax
Material: SS | Quantity saved: One
Hiroshima, Japan
2006 Veolia CMF12
- Manufacturer: Suez WTS / Veolia
PP hollow fiber membrane module (1.5m2 x 12 modules) ＜Basic design Leachate (after pretreatment, PH 6-9, water temperature 2-35°C, turbidity ava < 30°C) in continuous operation for 24 hours (backwash interval 60 ...
Hiroshima, Japan
Hosokawa Micron ACM-10
- Manufacturer: Hosokawa Micron
- Model: ACM-10
Grinding: 7.5 kW Classification: 0.75 kW Feed: 0.2 kW Test run video available here ⇓
Hiroshima, Japan
2006 SANMARU MACHINE INDUSTRY HC3-2H
- Manufacturer: Mimaru Machinery Industry
Processing capacity: 1500L/H. Operating pressure: 50 MPa for normal use, 70 MPa max. Hydraulic single-stage pressurization system.
Hiroshima, Japan
2012 SANMARU MACHINE INDUSTRY HC3-2H
- Manufacturer: Mimaru Machinery Industry
Processing capacity 3000L/H. Maximum working pressure 30MPa (pressurization method: manual 2-stage pressurization).
Hiroshima, Japan