Used Electrical Test Instruments in Dublin, Ireland

Chase LFR1000

Details The Chase LFR1000 delivers accurate low-frequency spectrum analysis from 9 kHz to 150 kHz, with a noise-floor sensitivity of –120 dBm and a dynamic range exceeding 100 dB. It features a 1 Hz resolution ba...

Schaffner NSG2025-8

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-8 is a high-end 3-phase fast transient/burst generator capable of generating signals up to 8kV with a maximum burst frequency of 500kHz. It integrates a 30A coupling network and supp...

Schaffner NSG2025-4

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG2025-4 is a high-end three-phase Fast Transient/Burst Generator, delivering up to 4.4kV pulse amplitude with a maximum burst frequency of 1MHz. It integrates a 30A coupling network and su...

Schaffner CDN110

• Manufacturer: Teseq - Schaffner

Details The Schaffner CDN110 is a single-phase surge coupling/decoupling network designed for use with the NSG651 High Energy Pulse Generator. It enables coupling of pulses up to 6.6 kV (1.2/50 µs waveform) or su...

Teseq (Schaffner) NSG 5600

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG 5600 is a precision EMC tester that generates synchronized, multi-channel automotive-specific waveforms including voltage dropouts, sinusoidal bursts, dips, ISO/SAE pulses, and mag...

Schaffner NSG3025

Details The Schaffner NSG3025 Burst Generator offers a pulse amplitude range from 200V to 4.8kV ±10% (open circuit), with burst frequency adjustable between 0.1kHz and 1MHz ±2%. It supports 1 to 255 spikes per pa...

Rohde & Schwarz ESPI3

• Manufacturer: Rohde & Schwarz
• Model: ESPI

Details The Rohde & Schwarz ESPI3 is a 9kHz to 3GHz precompliance test receiver designed for EMI diagnostics across CISPR, EN, ETS, FCC, ANSI C63.4, VCCI, and VDE standards. It features five selectable detectors ...

EMCO 3810/2

• Manufacturer: Emco

Details The Emco 3810/2 Line Impedance Stabilization Network (LISN) is a dual-channel low pass filter engineered to isolate test equipment from external power sources while directing RF signals to a 50-ohm port. ...

EMCO 3115

• Manufacturer: Emco

Details The Emco 3115 Antenna is a linearly polarised broadband double ridged guide antenna covering 1 GHz to 18 GHz. It offers excellent gain, stable VSWR, and supports up to 300 W continuous power with 500 W pe...

Teseq NSG4070C-35

• Manufacturer: Teseq - Schaffner

Details The Teseq NSG4070C-35 Test System For Conducted And Radiated Immunity is a versatile immunity test system designed for precise conducted and radiated immunity testing across various frequency ranges. It s...

Teseq (Schaffner) NSG 3060

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-3060 is a modular, expandable immunity test system capable of generating surge voltages up to 6.6 kV for overtesting. It integrates IEC and ANSI coupling methods and features a 7″ ...

Schaffner NSG 651

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG651 Telecom Surge Generator delivers hybrid pulses of 1,2/50 µs up to 6,6 kV and 8/20 µs up to 3,3 kA, addressing IEC 801-5, ANSI‑IEEE C62.45 and VDE 0109 requirements. It also provides t...

Teseq NSG3040

• Manufacturer: Teseq - Schaffner
• Model: NSG 3040

Details The Teseq NSG3040 Immunity Test Multifunction Generator is a modular, expandable EMC system designed for high-precision immunity testing. Capable of surge voltages up to 4.4 kV, EFT/Burst up to 4.8 kV, an...

Rohde & Schwarz FSET22

• Manufacturer: Rohde & Schwarz

Details The Rohde & Schwarz FSET22 Test Receiver offers a frequency range from 100Hz to 22GHz, delivering high sensitivity and precise spectrum analysis for advanced testing applications. It supports wide dynamic...

Rohde & Schwarz ESRP7

• Manufacturer: Rohde & Schwarz
• Model: ESRP

Details The Rohde & Schwarz ESRP7 EMI Test Receiver offers a frequency range from 9 kHz to 7 GHz, designed for efficient and precise electromagnetic interference (EMI) measurements. It supports fast precompliance...