Building Filters

Used Centrifugal Separators in Hiroshima, Japan

1989 Matsumoto Machinery Works MARK III 48 × 30
- Manufacturer: Matsumoto Machinery Works
Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G
Hiroshima, Japan
Tikara Engineering 60 × 25 1/2 type
- Manufacturer: Tikara Engineering
Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...
Hiroshima, Japan
There is no nameplate 24 吋
- Manufacturer: No nameplate
Basket SUS Casing SS + SUS (side) Upper discharge type The entire disassembly and maintenance is performed at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the exter...
Hiroshima, Japan
Alfa Laval (DeLaval) SSG109
- Manufacturer: アルファラバル(デラバル)
3.7KW 200V 7900rpm Where to use: Chemical plants Food plants Feed and fertilizer plants Environmental recycling plants Water treatment plants | Throughput: 2.500L～5,000L/h | Sealed wetted parts: SUS Main body only
Kure, Japan
1989 Tanabe Wiltech ACT-30
- Manufacturer: Tanabe Wiltech
30" SUS Fully automatic, explosion-proof Power: 7.5kw (d2G4) | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
There is no nameplate 24 吋
- Manufacturer: No nameplate
Basket SUS Casing SS + resin sheet Upper discharge type Since the entire disassembly and maintenance is performed at our maintenance shop, you can be assured of the finish of the mechanical parts as well as the e...
Hiroshima, Japan
Kyoritsu Manufacturing Co., Ltd. 48 type
- Manufacturer: Kyoritsu Seisakusho
SUS, 48", manual scraper, 725 rpm The entire machine is disassembled and serviced at our maintenance shop, so you can be assured of the finish of the mechanical parts as well as the external appearance. We can fi...
Hiroshima, Japan
Tanabe T-36
- Manufacturer: Tanabe
36" SUS, fully automatic (without scraper), 1150 rpm, explosion-proof. No control panel.
Hiroshima, Japan
1996 Tanabe Wiltech DAC-42
- Manufacturer: Tanabe Wiltech
Explosion-proof, 42" fully automatic bottom discharge.
Hiroshima, Japan
2010 G-TECH 1456/3 type
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
2017 Chikara Engineering HANG48×800
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: Tanabe Wiltech
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
1989 Tanaka Giken Industry AE 55 × 22
- Manufacturer: Tanaka Giken Industry
55-inch SUS Fully automatic type Hydraulic unit (0.75kw) Basket capacity: 430L Rotation speed: 900rpm Centrifugal effect: 600G The entire machine is disassembled and serviced at our maintenance shop, so you can b...
Hiroshima, Japan
1996 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned, and there is a spare rotor for one unit. Click here to see a video of the ...
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: Tomoe kogyo
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan