Used Veneer Machines

Innovator Smart Veneer Faces Production Lines (Installed)

Are you looking for a veneer face production line? We can help! We offer Innovator Smart Veneer Faces Production Lines with installation. (A) Items： Double Knife Veneer Guillotine Double Sided Veneer Glue Applica...

Cornwell CTH-TC-7 Dead Blow Hammer

Northtech NT VeneerSolid M1 Longitudinal Veneer Splicer

The butt-jointed longitudinal veneer splicers manufactured by INNOVATOR Machinery, different from the traditional paper taping or zig-zag thread stitchers, are ideal for processing high-quality glue-spliced venee...

Northtech NT VeneerPlus G1 Longitudinal Veneer Splicers

The VeneerPlus accurately and firmly bonds veneer edges with no visible joint line. The NT VeneerPlus G1 Longitudinal Veneer Splicer is equipped with an integrated gluing system inside. It’s particularly suitable...

Northtech NT UltiMate 1500 Series Crossfeed Veneer Splicer

The NT UltiMate 1500 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT UltiMate 2800 Series Crossfeed Veneer Splicer

The NT UltiMate 2800 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech NT UltiMate 3400 Series Crossfeed Veneer Splicer

The NT UltiMate 3400 Series Crossfeed Veneer Splicer is designed to create glue-spliced joints on long and panel-sized veneer faces. Veneer bundles can be well-cut straight with double knife guillotines and then ...

Northtech GlueEasy 3000C Veneer Edge Trimming & Glue Applicator

The GlueEasy C-Series machines are manufactured to provide precise and reliable 90° glued veneer edges on thick veneers. Unlike traditional hand-gluing methods, the veneer pack is placed vertically and clamped ti...

SAVI TFK-700 Cross Cut Veneer Clipper

• Manufacturer: Savi

This is a hard to find machine and they haven’t changed all that much over the years. 700mm/27.5″ capacity. Hydraulic movement of blade with dual palms for safety. 3kW(4 HP), 220-240/440-480V/3-phase pump motor. ...

Northtech NT CutMate 700C Cross-Cut Veneer Clipper

The NT CutMate 700C cross-cut veneer clipper is used for cutting veneer across its grain. All INNOVATOR guillotines are expertly manufactured with European quality and safety standards thanks to a partnership wit...

Fischer & Ruckle Omnimaster Plus Veneer Splicer

• Manufacturer: Fischer

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm F...

Fisher + Ruckle Veneer Longitudinal Splicer FZK

• Manufacturer: Fisher + Ruckle

Fisher + Ruckle Veneer Longitudinal Splicer FZK Good Condition Runs Well

Fisher+Ruckle FZR-15 Crossfeed Splicing Machine Stock #10368

• Manufacturer: Fisher+Ruckle

Fisher+Ruckle Model FZR-15 Crossfeed Splicing Machine Effective Length of Heating Zone 1536mm ( 60") Throughput Speed 33m/min. (108 Ft/Min) Maximum Nominal Output / Machine Cycles - 30 Cycles/min Average Producti...

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE

• Manufacturer: FISHER RUCKLE

2006 FISHER RUCKLE EM34 VENEER SPLICING MACHINE Manufacturer: M+S Brugg AG Model: EM-34 Mfg Date: 2006 Power: 400v, 60hz, 3ph CSA Hours: 12,693 Machine Type: Veneer splicing machine (crossfeed) Splicing T...