- Trusted Seller
2009 SLITTING LINE
used
- Manufacturer: VIGANO (Italy)
1,500 MM 0.4-3.0 MM Qty. 1 Second-hand slitting line – on foundation! Mfc.: Vigano (Italy), Built: 2009, Status: stopped, but on foundation Strip Width: 400 - 1,500 mm, Strip Thickness: 0.4 - 3.0 mm Input coil: m...
Friedrichsdorf, Germany - Trusted Seller
Friedrichsdorf, Germany - Trusted Seller
1989 SLITTER
used
- Manufacturer: Mariani
1500 MM 0.5-3.0 MM MARIANI Qty. 1 Second-hand slitting line - dismantled & in storage Manufacturer: Mariani (Italy), Built: 1988/89 Electrical and controllers are from: 2008/10, Status: dismantled and in storage ...
Friedrichsdorf, Germany - Trusted Seller
1998 SLITTER
used
- Manufacturer: LIMONTA / EUROSLITTER, PROMEC
650 MM 0.3-3.0 MM MIN. EXIT WIDTH 14.2 MM Qty. 1 Second-hand slitting line - dismantled & stored in a warehouse Mfc.: Limonta / Euroslitter & Promec, Built: 1998, Revamped: 2001 & 2016, Dismantled: 2023 2001 - B...
Friedrichsdorf, Germany - Trusted Seller
2001 SLITTER
used
- Manufacturer: Kampf
Qty: 1 Second-hand slitting line | Width: 635-1753 MM | Thickness: 0.05-0.38 MM | Slitting width: 15.8-1169 MM
Friedrichsdorf, Germany - Trusted Seller
2017 Pel-Job slurry slitting device 8m
used
- Manufacturer: Pel-Job
Slurry spreader 8m with own axle air braked with attachments control terminal electric forced steering 2 distributor heads Top condition, little used! also suitable for small and single-axle slurry tankers!
- Trusted Seller
1977 SLITTING MACHINE
used
- Manufacturer: Bobst - Rotomec
180 GSM Qty: 1 Second-hand Slitting Machine | Width: 1000 MM
Friedrichsdorf, Germany 
Electric slitter rewinder 200cm
used
Cutting length: 200 cm incl. base frame incl. roll holder incl. collection bag for paper waste incl. lighting Cutting feeder max. cutting thickness: 1.2 mm electric cut release with foot switch or by pressing a b...
$1,876 USDHattersheim am Main, Germany
Circular cardboard scissors (length cutter)
new
The circular cardboard shears are designed for longitudinal cutting of thick material webs (e.g. cardboard, leather, rubber, sponge cloth, etc.). The sturdy design safely absorbs the high forces that occur during...
Mühltal, Germany
Mühltal, Germany
Length cutter for weighted film web
new
With the "crush cut" cutting process used here (crush cut knife on glass-hard sleeve), a wide variety of materials (e.g. weighted film web, max. 6 mm thick) can be cut without any problems.
Mühltal, Germany
Trimming device as an exchangeable cassette
new
The trimming device is equipped with 2 sawing units and is used for trimming a rigid material web (e.g. laminate web, etc.). A special feature here is the design as an interchangeable cassette. Depending on the m...
Mühltal, Germany
Longitudinal cutter with tangential cut
new
With this cutting process a wide variety of materials (e.g. paper, foil, textiles, etc.) can be cut without any problems. By equipping it with a pneumatically operated lower knife shaft and individually adjustabl...
Mühltal, Germany
Tip: Enter manufacturer, model or keyword
