Sheet metal benders
- Manufacturer: Zako Skotnice
Length: 3 – 8m | Strength: 1mm/2mm/3mm | Depth(width): 1m or 1.25m | Bend angle: 145° / 165° | Bending beam: Geometry according to customer requirements | Delivery time: about 4 months or depending on the a...
Steißlingen, Germany- Trusted Seller
Karlsbad, Germany - Trusted SellerAuction
WIEGER FSW4.5/3030 WIEGER Impact Shears FSW 4.5/303
- Manufacturer: Wieger
For sale is a hydraulic impact shears from the German quality manufacturer WIEGER Maschinenbau, type FSW 4.5/3030, built in 1966. The machine impresses with its solid, durable design and is ideal for cutting shee...
Zell im Wiesental, GermanyVisit Auction Website - Trusted SellerAuction
Aalen, GermanyVisit Auction Website - Trusted Seller
2012 SCHECHTL KS 200
- Manufacturer: Schechtl
- Model: KS 200
Swivel bend. Manual, simple Sheet thickness (mm): 1 | Sheet width (mm): 2000 | Work area: 2.000 x 1 mm
Metzingen, Germany 
Unrolling and splitting systems
- Manufacturer: Zako Skotnice
Can be ordered in different sizes and configurations, as well as with automated coil storage!
Steißlingen, Germany- Trusted Seller
1980 REIS TUS 60
- Manufacturer: Reis
- Model: TUS-60
Spotting press with extendable table and swing out top plate
Metzingen, Germany - Trusted Seller
1970 REIS TUS 60 OK
- Manufacturer: Reis
- Model: TUS-60
Hydraulic spotting press with swing out device Pressure capacity (to): 40 | Table length (mm): 670 | Table width (mm): 570
Metzingen, Germany 
1984 EDEL Stanzprofi 400 #1052-01021
- Manufacturer: Edel
- Model: STANZPROFI 400
- Power requirement: 3.2 kilowatt
Accessories tool cabinet with various punches and dies
Bühl, Germany
OBRU WAM
- Manufacturer: OBRU
- Power requirement: 0.18 kilowatt
With drive Manual central spreader Motor has only an on/off switch Brake mecanical Band loop control via dancer roller in start/stop mode The decoiler is running
Sinsheim, Germany
2025 ARKU RM 1825
- Manufacturer: Arku
- Model: RM 1825
- Power requirement: 1.7 kilowatt
Part leveler and strip leveler - Maximum vertical roller spacing: 8 mm - Circulating oil lubrication of the drive shafts and leveling roller bearings - Infeed/outfeed table - Speed ??control via handwheel - Strip...
Sinsheim, Germany
Mössner Cast plate production for semi-finished product manufacturers
- Manufacturer: Mössner - Rekord
Mössner's plate production for cast slabs enables fully automated sawing of slabs into plates and, if required, milling and foiling on both sides. In order to be able to react flexibly to their customers’ individ...
Eschach, Germany
1985 REIS TUS 115 OK 100
- Manufacturer: Reis
- Model: TUS-115
Press force: 100 t | Stroke: 1035 mm | Distance between columns: 1250 mm | Side window: 700 mm | Daylight table - ram (stroke up): 1035 mm | Surface of table: 1280 x 890 mm | Table height above floor: 630 mm | S...
Eislingen, Germany
1985 REIS TUS 125 OK 200
- Manufacturer: Reis
- Model: TUS-125
Press force: 200 t | Stroke: 1150 mm | Distance between columns: 1250 mm | Side window: 705 mm | Daylight table - ram (stroke up): 1475 mm | Surface of table: 1200 x 1500 mm | Table height above floor: 638 mm | ...
Eislingen, Germany
1979 REIS TUS 60 OK-40
- Manufacturer: Reis
- Model: TUS-60
Press force: 40 t | Stroke: 975 mm | Distance between columns: 620 mm | Side window: 470 mm | Daylight table - ram (stroke up): 940 mm | Surface of table: 1000 x 590 mm | Table height above floor: 770 mm | Surfa...
Eislingen, Germany
Tip: Enter manufacturer, model or keyword