Used Processing in Flanders, Belgium

Atlas-Copco GA90VSD + FD230

• Manufacturer: Atlas-Copco
• Model: GA 90

tank 2000 liter capacity: 16,2 m3/min pressure: 7,5 bar power: 90 kW with FD230 air dryer

Andouart Ø 26 mm

• Manufacturer: Andouart

Extrusion of plastic tubes max Ø 26 mm screw Ø 60 11 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81 click here S...

Andouart Ø 26 mm

• Manufacturer: Andouart

extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench, vacuumcooler, drawing bench cutting device Will only be sold in combination with the following lines: Samafor 81...

Future Controls Ms-101 Injection mold-testing device

• Manufacturer: Future Controls Ms-101

Mold Sampler: device for making prototype moulds. A plastic substance is heated and injected into the mould. mounted on mobile table incl accessories pressure: 4-6kg/cm2

Netstal N235-90MP injection moulding

• Manufacturer: Netstal

klemkracht 900 kN injectiekracht 196 kN openingsruimte 125 - 300 mm matrijsruimte 200 - 500 mm inbegrepen: tempereereenheid trechter / mixer zonder gereedschap

Modesta Blower installation

Modesta blower, type: MX15/351, serial number: B5211242, year of construction: okt-05, 11 kW, capacity: 10390 m³/h, weight: 500 kg, outfeed diameter: 350 mm, total dimensions: 1380 mm x 1000 mm x 1670 mm.

Aariac Air compressors

Aariac air compressor, model: CPRD 4200 N 8298 MT V230, year of construction: 2014, 230 V, 3 Ph, 50 Hz, 3 kW, maximum pressure: 11 bar, weight: 121 kg, dimensions: 1550 mm x 500 mm x 950 mm.

Tecumsek Condensors

Tecumsek condensing unit, model: SILAJ2446ZFZ, 220/240 V, 50 Hz, 4.1 A, refrigerant: R404A, dimensions condensing unit: 900 mm x 550 mm x 820 mm.

NN roller conveyor Roller conveyor

Plastic roller conveyors, roller width: 450 mm, total dimensions: (2x) 980 mm x 480 mm x 60 mm. Missing rollers.

Dumon Roller conveyor

Dumon 45° roller conveyor, fabrication number: 1910052, s/s frame, plastic rollers, roll width: 160 mm, total dimensions: 2200 mm x 920 mm x 940 mm.

NN roller conveyor Roller conveyor

Mobile roller conveyor, s/s frame, plastic rollers, roller width: 540 mm, total dimensions: 1600 mm x 620 mm x 860 mm.

Boge DS2-DS30

• Manufacturer: Boge

Boge DS2-DS30 Diesel-oil (1) -- naphte (2) -- electr (3): Elektr | Max output: 10 bar | Voltage: 3 x 400V | Volume flow rate: 0,50–0,54 m³/min | Power imput: 4 kW | Length: 480 mm | Width: 907 mm | Height: 955 mm...

Myung-Il Foamtec MI-PE 150 extrusion bench

• Manufacturer: Myung-Il Foamtec

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Laborex I1650 P - sandblasting

• Manufacturer: Laborex

Laborex shotblastmachine

Andouart extruder

• Manufacturer: Andouart

Andouart extruder