Used Processing in Saxony, Germany

GRACO pneumatic immersion pump

• Manufacturer: Graco

Immersion pump, pneumatic GRACO Model 6204117 Series D0 Ratio 2-1 used, tested !

KAESER compressed air dryers

• Manufacturer: Kaeser

Kältetrockner, Drucklufttrockner mit Öl-Wassertrenner KAESER TB 19 ( TB19 ) Öl - Wassertrenner: AQUAMAT 1 .: 5.2648.00010 ohne Kältemittel ! gebraucht, geprüft !

M. SCHNEIDER compressed air tanks

• Manufacturer: Schneider

Pressure vessel, compressed air tank with holder M. SCHNEIDER KOMPRESSORENWERK BLITZ compressors Spare part for, among other things, a pressure machine PAUL ERNST FG3-1400 ! used, tested !

ECOAIR compressor

• Manufacturer: Ecoair

Compressor with refrigeration dryer, screw compressor ECOAIR D5 0.45 m³/min 10 bar 5.5 kW 400 V 3AC Refrigeration dryer: INGERSOLL-RAND DryStar DS006SS 0.24 kW 230 V AC used, tested !

MORE compressor

Kompressor Mehrer D2.HV3. 5,5 750. HM ( D2.HV3.5, ) gebraucht, geprüft !

ATMOS compressor

• Manufacturer: Atmos

Compressor, screw compressor ATMOS SE 440 ( SE440 ) 46,5 kW 400 V As good as new !

2010 BOGE S 20-2

• Manufacturer: Boge
• Model: S20

ex Works, loaded free, truck Max. pressure 8 bar control voltage 24 Volt total power requirement 15 kW Number of working hours 39.819 h

2010 BOGE S 20-2

• Manufacturer: Boge
• Model: S20

ex Works, loaded free, truck Max. pressure 8 bar control voltage 24 Volt total power requirement 15 kW Number of working hours 20.563 h

Swarf Conveyor

Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20m...

2010 Richter SP 450 / 63

• Manufacturer: Richter
• Power requirement: 0.75 kilowatt

Made of sturdy sheet steel construction. This is a scraper belt conveyor. Drop-in width: F1= 480mm; Drop-in length: 750mm Ejection: height H = 3200mm Infeed (underfeed to the machine): height = 300mm + superstruc...

2004 DGS SYSTEM GMBH KBF 325

• Manufacturer: DGS SYSTEM GMBH
• Power requirement: 0.37 kilowatt

Scraper belt conveyor combined with cooling water system and torque shut-off Discharge length D=280mm Chip infeed width F=325mm Insertion height B=approx. 160mm Insertion height B+I=220mm Chip infeed width F1=300...

2007 Sermeto 01

• Manufacturer: Sermeto
• Power requirement: 2.8 kilowatt

Slat-band conveyor very good, little used condition. Cooling water tank 1300 x 2050 x 260mm discharge length D=500mm Total chip intake length approx. AX= 4120mm with sheet metal tray with rubber coating, width 23...

Super plate, DW15, galvanized

• Manufacturer: Ulma

Ulma Superplatte DW15 – square, galvanized, 10° tiltable, 90 kN service load The Ulma Superplatte DW15 (Art. No. 1900256) is a heavy-duty, galvanized anchor plate for DW15 formwork and anchoring systems. It se...

2021 FINI Pulsar EVO BK119-5,5-SD

• Manufacturer: Fini
• Power requirement: 4 kilowatt

Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliab...

2017 KIESS Taifun 200 mit ADV80

• Manufacturer: Kiess

Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic ...