Used Milling Machines in Saxony, Germany

Trusted Seller
1976 Induma 3/S-A
- Manufacturer: Induma
- Power requirement: 3 kilowatt
Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Eq...
Leipzig, Germany
Trusted Seller
1981 HECKERT FQW 400
- Manufacturer: Heckert
- Model: FQW 400
loaded free, truck x-travel / mm y-travel / mm z-travel / mm Table dimensions 400 x 1600 mm tool taper ISO 50 table load max. 1,5 t movement longitudinal 200...1400 mm move cross 55...505 mm move vertical 100...5...
Eilenburg, Germany
Trusted Seller
WMW FH
- Manufacturer: WMW
Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included.
Leipzig, Germany
Trusted Seller
1988 FRITZ HECKERT FU400/E
- Manufacturer: Heckert
- Model: FU400E
- Power requirement: 14.5 kilowatt
Incl. equipment Control type: conventional | Freight basis: from stock Zschepplin | X-off: 1120 mm | Y-off: 345 mm | Z-way: 400 mm | Total power requirement: 14,5 kW | Machine weight approx.: 3,85 t | Space requi...
Zschepplin, Germany
Trusted Seller
1980 WMW FSS 250x1000
- Manufacturer: WMW
- Model: FSS 250X1000
additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates
Leipzig, Germany
Trusted Seller
1984 WMW FUW 315/5
- Manufacturer: WMW
- Model: FUW 315/5
- Power requirement: 7.4 kilowatt
Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: ...
Leipzig, Germany
Trusted Seller
1995 Emco FB-5
- Manufacturer: Emco
- Power requirement: 5.3 kilowatt
Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spin...
Leipzig, Germany
Trusted Seller
1984 ELU AS 70
- Manufacturer: Elu
- Model: AS 70
- Power requirement: 0.8 kilowatt
This milling machine is ideally suited for window. - long hole milling machine for aluminium - pneumatic tool clamping - feeder: hand lever operation - safety device: 2,2 V
Leipzig, Germany
Trusted Seller
1996 Hermle UWF 851 H
- Manufacturer: Hermle
- Model: UWF 851
- Power requirement: 15 kilowatt
Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be de...
Leipzig, Germany
Trusted Seller
1990 Emco VMC-100
- Manufacturer: Emco
- Power requirement: 0.8 kilowatt
EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door ...
Leipzig, Germany
Trusted Seller
Stankoimport 6H80
- Manufacturer: Stankoimport
- Power requirement: 3.2 kilowatt
- spindle center distance / clamping surface vertical: min/max: 50 / 350 mm - spindle nose / clamping surface horizontal: min/max: 0 / 350 mm - travel range of the milling bar 600 mm - without counterholder - inc...
Leipzig, Germany
Trusted Seller
1984 Wilhelm Grupp UF 20
- Manufacturer: Wilhelm Grupp
The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo)
Leipzig, Germany
Trusted Seller
Optimum M3HS
- Manufacturer: Optimum
- Power requirement: 2.4 kilowatt
Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control uni...
Leipzig, Germany
Trusted Seller
1989 AVIA FFN40
- Manufacturer: Avia
- Power requirement: 6 kilowatt
Documentation: available Further information Control type: conventional | Freight basis: from stock Zschepplin | X-off: 600 mm | Y-off: 400 mm | Z-way: 380 mm | Total power requirement: 6 kW | Buques de alta mar:...
Zschepplin, Germany
Trusted Seller
1985 Deckel FP 4A MA
- Manufacturer: Deckel / Maho
- Model: FP 4
- Power requirement: 7.6 kilowatt
-Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit
Leipzig, Germany