Used Machine Tools in Germany

Induma metal milling machine machine tools and accessories

• Manufacturer: Induma

INDUMA metal milling machine with automatic longitudinal and cross feed. Sold without vice and accessories! Mounting set, are not included in the price,

Cleco pneumatic angle grooving machine (34 series) 34RAA37AX3 710 rpm 13-26 Nm

• Manufacturer: Cleco

Cleco Cleco 34RAA37AX3 - Angled groove runner (34 series with Clecomatic coupling) Product description: The Cleco 34RAA37AX3 is an ergonomic, pneumatic right angle nutrunner with automatic torque cut-off (Clecoma...

ENDRES-TOOLS Combination wrench

• Manufacturer: ENDRES-TOOLS

Combination tensioner, cranked, non-sparking ENDRES TOOLS NW 70mm SB - spark-free used! Very good condition.

PAGUS tool cabinet

• Manufacturer: Pagus

Tool cabinet PAGUS 450 x 450 x 870 mm (useful) 1 x drawer: width: 360 mm, depth: 440 mm, height: 70 mm with a key! Used!

Machine tools grinding machines

max. grinding diameter ? mm grinding length ? mm workpiece length ? mm weight of the machine ca. 50 kg dimensions of the machine ca. ? m

Lots of vises

consisting of 7 jaw widths: 150 mm, 150 mm, 160 mm, 220 mm, 200 mm, 220 mm and 200 mm Dimensions: 1200mmx800mmx500mm, weight approx. 500kg

1 core drilling machine Clipper Norton CDM203

• Manufacturer: Norton

Atlas Copco B315 H0-6 pneumatic die grinder, straight grinder, 600 rpm, 4110 0736

• Manufacturer: Atlas-Copco

Nameplate not identifiable. H1R7A5K18-7-PD 3.7 Age rating: No age restrictions | Country of manufacture: Sweden | Content: 1 piece | Mass: 3700 g | Item condition: Second hand

PAGUS tool holder

• Manufacturer: Pagus

Shaft with tool holder MK4 PAGUS Tool holder MK4 345756 60.000000.00200 2 Ball Bearing Kits: Ø 90/80 mm unused!

Pneumax 1400.40.150.03.2 Oil brake cylinder Ø 40mm / stroke 150 mm control on both sides

• Manufacturer: PNEUMAX

Ø 40 mm Stroke 150 mm Control on both sides H1R7F7K23_6_RD <3 kg

Cross hole drilling machine DIY

• Manufacturer: Eigenbau

Order no.: 174600, horizontal and vertical drilling unit

Cleco pneumatic angle grooving machine (34 series) 34RAA37AX3 480 rpm 18-37 Nm

• Manufacturer: Cleco

Cleco Cleco 34RAA37AX3 - Right-angle screwdriver with Clecomatic coupling (34 series) Special features: Clecomatic Clutch: Automatic cut-off clutch for precise torque. Reversing function: Forward and reverse oper...

Table drilling machine FLOTT B10/1

• Manufacturer: Flott

max. drill bit Ø: 10 mm, T-slot table: approx. 15x15x cm, older

KENNAMETAL tool holder

• Manufacturer: Kennametal

Tool holder KENNAMETAL TH1533413 /HSK100-A New! Lk no .: 102642147 | Tool: Ø 10 mm | Overhang (a dimension): 162 mm | Recording: HSK - A100 | Dimensions (tool holder): 215 x Ø 100 mm | Dimensions (packaging): 130...

PAGUS tool holders

• Manufacturer: Pagus

Tool holders, 23 pieces PAGUS SK50 7x holder for screw-in cutter internal thread: M16 x 2.0 7x milling cutter mandrel, partially incomplete 4x surface chucks (WELDON): diameter: Ã 16, 20, 25, 31 mm 1x collet chuc...