Used Machine Tools in Brandenburg, Germany

Kjellberg CUTi 35C

• Manufacturer: Kjellberg

Stromquelle: CUTi 35C | Netzanschluss: 1x 230 V | Schneidstrombei 25 % edbei 100 % ed: 15 A - 35 Amaximal 25 A mit integriertem Kompressor20 A | Schneidbereichmit internem kompressormit druckluftanschluss: bis 6...

Kjellberg CUTi 90

• Manufacturer: Kjellberg

Stromquelle: CUTi 90 | Netzanschluss*: 3x 400 V | Schneidstrombei 40 % edbei 100 % ed: 90 A55 A | Schneidbereich: bis 35 mm | Abmessungen (l x b x h): 470 x 180 x 270 mm | Masse: 17 kg | Plasmabrenner: KjellCut ...

Kjellberg FineMarker

• Manufacturer: Kjellberg

Output current: 4 - 25 A | Duty cycle: 100 % | Weight: 30 kg | Dimensions (l x b x h): 710 x 400 x 440 mm | Marking gases: Argon or air | Marking speed: 1.5 - 12 m/min | Plasma torch: PB-M25 W (liquid-cooled)

Kjellberg HiFocus 280i neo

• Manufacturer: Kjellberg

Power source: HiFocus 280i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 280 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 70 mm | Piercing: up to 40 mm | Dimensions (l x ...

Kjellberg HiFocus 360i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 80 mm | Piercing: up to 50 mm | Dimensions (l x ...

Kjellberg HiFocus 600i neo

• Manufacturer: Kjellberg

Power source: HiFocus 360i neo | Mains voltage*: 3x 400 V, 50 Hz | Cutting current (at 100 % duty cycle): 10 - 360 A | Marking current: 5 - 50 A | Cutting range: 0.5 - 160 mm

Kjellberg Q 1500

• Manufacturer: Kjellberg

Power source: Q 1500 / Q 1500 plus | Cutting current at 100% d.c.1: 20 - 150 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 40 mm60 mm30 mm | Cutting ra...

Kjellberg Q 4500

• Manufacturer: Kjellberg

Power source: Q 4500 | Cutting current at 100% d.c.1: 20 - 450 A | Marking current at 100% d.c.1: 5 - 60 A | Cutting ranges mild steelrecommendedmaximumpiercing2: 0.5 - 70 mm120 mm50 mm | Cutting ranges stainles...

1992 Soraluce FSR 8000

• Manufacturer: Soraluce

2000 HANS SCHöN UTE FF 300

• Manufacturer: HANS SCHöN

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction J51...