Used Foundry & Casting in Germany

1990 DISA 2070 A

• Manufacturer: DISA

Disamatic vertical flaskles Moulding Line 2070 A Mould thickness 200 – 650 mm Mainly consists of: Moulding Machine (DMM – 5,9 Mil. original moulds produced only until now) SSU PMC 14 m SBC 12 m Cyclone Electric...

No-Bake Shake out

No-Bake Shake out The Shakeout deck is manufactured from 70 mm thick mild steel with D050 mm apertures covered by 20 mm thick Hardox 400 D=40 mm Mainly consists of: Shake-out grid with steel frame Counter-vibrati...

2007 WEBAC ZUFS 200x2750

• Manufacturer: Webac

Molding sand recovery system 60 t/h Mainly consists of: Unpacking group Regeneration group A Regeneration group B knock-out grates (2 pcs.) Concrete Counter-vibrating mass (2 pcs.) Funnels (2 pcs.) Vibratory conv...

VOGEL & SCHEMMANN MISCHKA II

• Manufacturer: Vogel

Charge max. 200 kg, container Ø 770 x 400 mm, capacity max. 2.4 t/h, drive power 7.5 kW, connected loads 380 V, 50 Hz, hand lever door lock, intervention protection, emergency stop pressure switch, hinged lid wit...

Sand dosing container

Tank for volumetric sand dosing, double conical truncated cone, welded in the middle, capacity approx. 70 l / 100 kg, each with a flange-mounted, pneumatically actuated rotary valve at the inlet/outlet, flange si...

2014 KLEIN Balgdosiergerät BDG 504 (EFV)

• Manufacturer: Klein

Dosing volume 200-500 cm³, electrical (adjustment) remote adjustment (EFV)

2006 KLEIN Balgdosiergerät BDG 304

• Manufacturer: Klein

Dosing volume 200-300 cm³

1993 GTG - Gießereitechnik GÖTZ BDE 2-770/960-A-G

• Manufacturer: GTG - Gießereitechnik GÖTZ

Two-component binder system, metering pumps 770/960 cm³

2017 SEGAB ColdBox-Flüssigkeitsdosiergerät FD

• Manufacturer: Segab

Two-component binder system, dosing pumps 2.23 l/min, 0.37 kW, switch cabinet, PLC control, dosing valves

1982 GISAG Flügelmischer AMF 160

• Manufacturer: Gisag

Mixing container, Ø 960 x 500 mm, usable capacity max. 160 dm³, discharge height approx. 675 mm, mixing blades, batch max. 200 kg, capacity approx. 3-4 t/h, pneumatic discharge gate, drive power 7.5 kW, connected...

1993 LUEBER LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Mains/control voltage 380/220 V, 50 Hz, heat output 8 kW, cold box process

LAEMPE / RÖPER / Vogel & Schemmann 1 - 2,5 - 5 - 12 - 16 - 20 - 25 Liter

• Manufacturer: Laempe / Röperwerk

Please ask for our separate accessories and parts list!

RÖPERWERK H 40

• Manufacturer: Laempe / Röperwerk

Four-column machine, shooting volume 40 l, working area 1100 x 1000 x 1000 mm, core box max. 1000 kg, clamping/separating device, vibratory feeder, LUEBER ColdBox gas flushing unit LW-FDA1640, hydraulic unit, saf...

RÖPER H 16

• Manufacturer: Laempe / Röperwerk

Four-column machine, shot volume 16 l, core box max. 620 x 300 x 475 mm/ 300 kg, clamping & separating device, sand hopper, housing, PLC control system

RÖPER H 25

• Manufacturer: Laempe / Röperwerk

Single-column machine, shot volume 25 l, core box max. 800 x 1000 (650) x 550 mm, pneumatic-hydraulic table height adjustment, sand hopper, lever control valve, KOMAX K2-A hardening machine, GASOMAT GESD-SH-150-3...