Used Bending & Forming in Bavaria, Germany

Trusted Seller
ROLLMAK SME 140-20/4.5
- Manufacturer: ROLLMAK
- Power requirement: 2.2 kilowatt
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg. | Sheet width: 2050mm | Plate thickness: 4.5mm | Pre-bending: 4.0 | Volt: 400V | Frequency range: 50Hz | Minu...
Günzburg, Germany
Trusted Seller
EPPLE RME 1020-2
- Manufacturer: EPPLE
Control: conventional - | Storage location: Günzburg | Sheet width: mm | Plate thickness: mm | Total power requirement: kW | Weight of the machine approx.: t | Dimensions of the machine approx.: m
Günzburg, Germany
Trusted Seller
2004 SALVAGNINI P4-2516-ALA
- Manufacturer: Salvagnini
- Model: P4
- Power requirement: 43 kilowatt
Control: CNC - | Storage location: Location | Freight basis: Delivery ex location. | Plate length max.: 2780mm | Sheet width - max.: 1500mm | Pressing length - max.: 2550mm | Bending height - max.: 185mm | Sheet...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 400
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 4mm | Roll diameter: 133mm | Weight of the machine approx.: 440kg | Dimensions of the machine approx.: 1580x550...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 125
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 1,25mm | Distance between roll centers: 62 | Weight of the machine approx.: 130kg | Dimensions of the machine a...
Günzburg, Germany
Trusted Seller
1992 KRAMER AMaut. IIIa 2500
- Manufacturer: Kramer
- Model: AMaut
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Plate thickness: 3mm | Bending angle: 165° | Weight of the machine approx.: approx. 3,900kg | Dimensions of ...
Günzburg, Germany
Trusted Seller
ROLLMAK BM 250
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 2,5mm | Roll diameter: 95mm | Weight of the machine approx.: 295kg | Dimensions of the machine approx.: 1482x45...
Günzburg, Germany
Trusted Seller
ROLLMAK BMH 400
- Manufacturer: ROLLMAK
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Plate thickness: 4mm | Distance between roll centers: 132mm | Frequency: 50Hz | Volt: 380V | Weight of the machine approx.: 470k...
Günzburg, Germany
1998 round bending machine Coil-Tec SM
- Manufacturer: Coil-Tec
Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.
Hohenbrunn, Germany
Fasti 125-10/1.5 round bending machine
- Manufacturer: Fasti
Used Fasti rotary table saw, motorized, foot-operated, manual rear angle feed, emergency stop cord, very good condition The machine will be professionally repaired, inspected, and cleaned, and will then be full...
Hohenbrunn, Germany
1998 round bending machine Schwartmanns WSRV 03.2
- Manufacturer: Schwartmanns
used Schwartmanns 3-roll round bending machine, with wire forming grooves, folding groove and swiveling upper glove, rear roller adjustable via the rack, machine repaired by a specialist, tested, cleaned and then...
Hohenbrunn, Germany
Trusted Seller
Auction
Lot Crimping pliers Molex / Knipex / Samtec
- Manufacturer: Molex / Knipex / Samtec
different sizes
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers DCM GS222
- Manufacturer: DCM
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers DCM AFM8
- Manufacturer: DCM
Gauting, Germany
Visit Auction Website
Trusted Seller
Auction
Crimping pliers Kings KTH-1000
- Manufacturer: Kings
for RF connectors
Gauting, Germany
Visit Auction Website