Used Agitators, Blenders, Mixers in Bremen, Germany

3500 liter agitator tank, Aisi 304 with propeller agitator

remarks: 1 stronger dent in the transition from cylinder to upper bottom; small dents in the cylinder; Foot reinforcements, Fe; Outlet extension bent

5000 liter agitator tank, Aisi 304 with propeller agitator

• Manufacturer: Behälter KG Bremen

Volume: 5.000 liter | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.540 mm | Cylindrical height: 2.500 mm | Total height: 4.600 mm | Manhole: in the upper bottom (Ø 500) | Technical equipment: c...

700 liter agitator tank, Aisi 304 with propeller agitator

remarks: Outlet fitting lower than the foot ends (take this into account when setting up); 1 screwed lid segment at the top edge (the rest is open); see photos

20000 liter agitator tank, Aisi 304 with blades agitator

• Manufacturer: ALFA-LAVAL

remarks: Smaller dents in the upper bottom; in addition, former connections were welded or sheet metal welded into the upper bottom; former outlet fitting is no longer available; Suspension of the manhole cover i...

420 Liter agitator tank, Aisi 304 with propeller agitator

remarks: 2 sight glasses in the cylinder no longer present; feet made of Fe, painted (with reinforcements made of st. st.); A pipe with a diameter of approx. 25 mm runs off the outlet pipe (see photos) agitator f...

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

5000 liter insulated agitator tank, Aisi 316 with 3 agitators

remarks: 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for...

450 liter agitator tank, Aisi 304 with agitator disc

• Manufacturer: Disco

agitator features: Motor-/gear unit with signs of corrosion; 1 hole in the fan cover (see photos)

500 liter pharmacy agitator tank, Aisi 316 with blades agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions) agitator features: Attention: Stirrer shaft (1.4301) and baffle (1.4541), Ais...

Agitator tank 6.5 cbm, half pipe coil

• Manufacturer: Sielmann

Design: Cylinder suspended on 4 supports with dished ends. Inclined blade agitator mounted from the top center - without motor or gearbox - with baffle. External half-pipe coils around the cylinder and lower end....

Agitator tank 12.5 cbm, with heating coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 pipe feet with basket-shaped bases. Inclined blade agitator from the top centered, 3.0 kW, 88 rpm. External half-pipe coil around the cylinder, 10 turns, designed for an operati...

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

16.000 liter agitator tank, AISI 304 with blades agitator

notice: some residues of previous content, bump at the cylinder

30000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: TUCHENHAGEN

max. allowable working temperature: 80 °C notice: bump at the insulation jacket, manhole cover is missing, pipe end cut flush remarks: Manhole approx. 345 x 445 mm; height-adjustable screws of the feet are missing