Used Laboratory Fume Hoods in Guangdong, China

Clean Room Fume Hood

• used

Explosion Proof Laboratory Fume Hood

• used

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

University Laboratory Bench Top Fume Hood

• used

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Sash...

Benchtop Fume Hood

• new

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Walk-In Fume hood

• new

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

PP Fume Hood

• new

PP is polypropylene. English name: Polypropylene, referred to as: PP, commonly known as: pp Polypropylene is the representative of polyalpha-olefins, a thermoplastic resin made from propylene polymerization, whos...

Ductless Fume Hood

• new

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

Perchloric Acid Fume Hood

• new

The perchloric acid fume hood is specially designed to handle the regular use of hot perchloric acid, hot nitric acid or perchloric acid. Does not handle sulfuric acid, acetic acid, organic solvents, or any combu...

Multi-sided Fume Hood

• new

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Basic Series Fume hood

• new

SPECIFICATION 1.Hood body&base cabinet: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder spr...

Benchtop Ductless Fume Hood

• new

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

Walk-In Lab Fume Hood

• used

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Stainless steel Fume Hood

• new

SPECIFICATION 1.Hood body&base cabinet:1.0mm full thickness 304#/316# stainless steel sheets and the surface is smooth. 2.Standard Work Surface: Stainless Steel. Optional: Phenolic Resin/Epoxy Resin/PP/Ceramic/Tr...

Chemical Resistant All Steel Fume Hood

• used

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Epoxy Coating Lab Steel Fume Hood

• used

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...