Used Laboratory Fume Hoods in Guangdong, China

Clean Room Fume Hood

Explosion Proof Laboratory Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

University Laboratory Bench Top Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Sash...

Walk-In Fume hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Ductless Fume Hood

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

PP Fume Hood

PP is polypropylene. English name: Polypropylene, referred to as: PP, commonly known as: pp Polypropylene is the representative of polyalpha-olefins, a thermoplastic resin made from propylene polymerization, whos...

Benchtop Fume Hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Stainless steel Fume Hood

SPECIFICATION 1.Hood body&base cabinet:1.0mm full thickness 304#/316# stainless steel sheets and the surface is smooth. 2.Standard Work Surface: Stainless Steel. Optional: Phenolic Resin/Epoxy Resin/PP/Ceramic/Tr...

Multi-sided Fume Hood

SPECIFICATION 1.Hood body: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder sprayed with epo...

Basic Series Fume hood

SPECIFICATION 1.Hood body&base cabinet: 1.0mm full-thickness high-quality cold-roll steel sheet is used as a whole; the steel surface is treated, phosphating and other processes, and then electrostatic powder spr...

Walk-In Lab Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Benchtop Ductless Fume Hood

SPECIFICATION *1. Hood body&base cabinet: Use galvanized steel sheets ≥1.2mm, electrostatically sprayed with epoxy resin, and covered with durable anti-chemical lead-free coating to maintain high finish and minim...

Chemical Resistant All Steel Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...

Lab Equipment Stainless Steel Fume Hood

1.Casework: 1.2mm thickness of #304 stainless steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.W...

Epoxy Coating Lab Steel Fume Hood

1.Casework: 1.2mm thickness of cold-rolled steel plate, after acid washing, phosphide andelectrophoresis, sprayed with good quality anti-corrosion static coating. 2.Inside Lining: 4mm thickness of Compact. 3.Work...