Test, Lab, Medical equipment » Materials Testing » Peel Testing Equipment » Guangdong

Search By Manufacturer

Building Filters

390

Used Peel Testing Equipment in Guangdong, China

  • Imported Tensile Testing Machine Strength

    Imported Tensile Testing Machine Strength Tester With Stroke Extension

    • Manufacturer: Perfect

    This 5KN imported tensile testing machine is single column pull machine , max 5KN capacity, it has the special design : double display and double control , can use separately or be connected with computer suitabl...

    Dongguan, China
  • Films / Silicone Rubber Adhesion

    Films / Silicone Rubber Adhesion Testing Machine Multi Position

    • Manufacturer: Perfect

    Cut 1 inch wide strip adhesive tape affixed to SUS # 304 stainless steel plate, after 2kg of standard rolling wheel to speed of 300mm per minute rolling back and forth for 3 times, the steel plate hanging on the ...

    Dongguan, China
  • 30 Positions ASTM D3654 30pcs

    30 Positions ASTM D3654 30pcs Adhesion Testing Machine

    • Manufacturer: Perfect

    Adhesive Tape 30 Positions Retentivity Testing Equipment For Tape are mainly used for pressure-sensitive adhesive tapes, medical patches, self-adhesive labels, protective films and other products for sticking tes...

    Dongguan, China
  • SGS Carrier Tape Horizontal 500N

    SGS Carrier Tape Horizontal 500N Tensile Testing Machine

    • Manufacturer: POOTAB

    The small horizontal tensile testing machine adopts touch screen control and brand-new testing software control. It is suitable for the peeling force,shear force,stretching,stripping, tearing,cutting, pulling for...

    Dongguan, China
  • Tilt Angle 30° CNS 11888

    Tilt Angle 30° CNS 11888 Adhesion Testing Machine

    • Manufacturer: Perfect

    Rolling Balls Tape Adhesion Tester use place the adhesive tape test sample cohere on tilt plate and the viscous face up, the tilt plate with 30° angle, taken sequentially from the largest to the smallest steel ba...

    Dongguan, China
  • Multi - position adhesion testing

    Multi - position adhesion testing machine for films / Silicone rubber

    • Manufacturer: Perfect

    Cut 1 inch wide strip adhesive tape affixed to SUS # 304 stainless steel plate, after 2kg of standard rolling wheel to speed of 300mm per minute rolling back and forth for 3 times, the steel plate hanging on the ...

    Dongguan, China
  • Multi Position Adhesion Testing Machine

    Multi Position Adhesion Testing Machine For Films / Silicone Rubber

    • Manufacturer: Perfect

    Cut 1 inch wide strip adhesive tape affixed to SUS # 304 stainless steel plate, after 2kg of standard rolling wheel to speed of 300mm per minute rolling back and forth for 3 times, the steel plate hanging on the ...

    Dongguan, China
  • UTM Precision 0.5% Pull Off

    UTM Precision 0.5% Pull Off Stress Testing Equipment For Daily Chemical

    • Manufacturer: Perfect

    UTM Precision 0.5% Tensile Strength Testers Pull Off Stress Testing Equipment applied to pull under load of 0 ~ 500KG; Do many tests like pressure;bending;stripping...etc., the strength and extension of the speci...

    Dongguan, China
  • SGS Touch Screen 122m/Min Adhesion

    SGS Touch Screen 122m/Min Adhesion Testing Machine

    • Manufacturer: Perfect

    Capacity: 10kg、20kg、50kg Option One | Force accuracy: ±0.5% | Force resolution: 1/300,000 | Test software: special software for unwind test, automatic recording of the time unwound 25%, 50% and 75% force value. ...

    Dongguan, China
  • Normal Temperature Adhesion Testing Machine

    Normal Temperature Adhesion Testing Machine / Lasting Adhesive Tester For Tape

    • Manufacturer: Perfect

    Adhesion Testing Machine Economic Type 5 Grours does some loading tests deriecting at adhesive force. Place 1 inch tape onto SUS#304 stainness steel plate and roll it by the standard rolling ball at 300mm/min thr...

    Dongguan, China
  • Tack Rolling Ball PSTC-6 GCr15

    Tack Rolling Ball PSTC-6 GCr15 Adhesion Test Machine

    • Manufacturer: Perfect

    I t follow that test method covers measurement of the comparative tack of pressure sensitive adhesives by a rolling ball and is most appropriate for low tack adhesives. It also meet GB/T 4852-2002

    Dongguan, China
  • Max Test Stroke 250mm 220V

    Max Test Stroke 250mm 220V 50Hz Release Force Tester

    • Manufacturer: PERFECT & POOTAB

    Use servo motor as a power source, can guarantee the accurate rate of output, XY axis has linear guide direction to ensure a good linearity. XY axis through the synchronous belt and can be a very good guarantee t...

    Dongguan, China
  • Two Columns Electrinic Universal Tensile

    Two Columns Electrinic Universal Tensile Testing Machine 2 Point Extension Fixture

    • Manufacturer: Perfect

    Two Columns Electrinic Universal Tensile Testing Machine Two Point Extension Fixture is used in the industries of rubber plastic, paper products, printing and packaging, adhesive tape, cases, handbags, textile, p...

    Dongguan, China
  • Pneumatic Clamp Electronic Universal Testing

    Pneumatic Clamp Electronic Universal Testing Machine Double Column

    • Manufacturer: POOTAB

    The PT-1169 Pneumatic Clamp Double Column Electronic Universal Testing Machine is the crystallization of the ninth generation of ours research and development achievements. It can test the physical properties of ...

    Dongguan, China
  • Adhesive Shear Strength Testing Machine

    Adhesive Shear Strength Testing Machine 30 Workpostions ASTM D3654

    • Manufacturer: POOTAB

    Use: The holding power of pressure-sensitive tapes, to do a static load test for the adhesive force of the tape, automatically under a certain load,Record the time that the tape can hold to confirm the aging of t...

    Dongguan, China
45678

Overview

Peel testing equipment is used to measure the adhesive strength of bonded materials by applying a controlled peel force. This type of equipment is essential in industries like packaging, electronics, and automotive, where the integrity of adhesive bonds is critical. These machines can test various materials, including tapes, films, and laminates, ensuring product quality and reliability.

FAQ

What factors should I consider when buying peel testing equipment?

Consider the types of materials you will be testing, the required peel force range, and the accuracy of the measurements. Also, ensure the equipment complies with relevant industry standards.

How is peel testing equipment typically shipped?

Peel testing equipment is usually shipped using specialized packaging to prevent damage. It’s recommended to use a reputable shipping service that handles delicate and precise instruments.

What maintenance is required for peel testing equipment?

Regular maintenance includes calibrating the equipment, checking for wear and tear on moving parts, and ensuring the software is up-to-date. Follow the manufacturer’s guidelines for detailed maintenance procedures.