Used tester in Shanghai, China

LS8517CX Common Mode Inductor Balance Tester

LS8517CX Common Mode Inductor Balance Tester, also known as Filter Balance Tester, is suitable for measuring the balance of Ls (inductance value) and DCR (direct current resistance) of various common mode inducto...

CZKS-6 Six Position Plug Socket Switch Life Tester

The CZKS-6 Six Positions Plug Socket Switch Life Tester is according to the IEC 60884-1:2022 Clause 20 and 21 (GB/T 2099.1-2021 Clause 20 and 21), IEC 60669-1:2017 Clause 18 and 19 (GB/T 16915.1-2024 Clause 18 an...

Auto Positioning 23 Slots Automobile Automotive Car Motor Starter Armature Testing Machine WIND-ATS-02

• Manufacturer: Wind Automation

Automotive car motor Starter armature tester analyse below items 1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER) Four-terminal measurement to ensure accuracy 2. Welding resistance,0.001mΩ-10mΩ (O...

ZRS-3H Glow-wire Test Apparatus

The ZRS-3H Glow Wire Tester (also known as Glow Wire Test Apparatus or Flammability Tester) is a high-precision testing instrument developed by LISUN specifically for evaluating the flame retardancy of products a...

ZY-3 Needle Flame Test

The ZY-3 Needle Flame Tester is a fire safety testing instrument designed by LISUN specifically for electrical and electronics, home appliances, lighting, and information technology equipment. It simulates “micro...

WB2671 AC/DC Withstand Voltage Test

The WB267* series AC/DC Withstand Voltage Tester is specially designed for high-voltage safety inspection of electrical products. Its core function focuses on AC/DC withstand voltage testing (some models speciali...

LS9923 Programmable Withstanding Voltage & Insulation Test

The LS9923 Programmable Withstanding Voltage & Insulation Tester is an integrated testing device developed by LISUN specifically for the safety inspection of electrical products. It centrally integrates two key f...

LS9955/56 Automatic Safety Test System

The LS9955/LS9956 Automatic Safety Tester is an integrated testing system developed by LISUN for the safety inspection of electrical products. It can complete five core functions in one stop: AC/DC Withstand Volt...

ZBP-T Ball Pressure Test Device

The ZBP-T ball pressure test device is designed according to the requirements of the “ball pressure test” specified in the following standards. It is mainly used for heat resistance tests on plugs and sockets for...

TTC-1 Tracking Test Chamber

The TTC-1 Tracking Test Chamber (also known as CTI PTI Tracking Flammability Test Chamber or Leakage Tracking Test Apparatus) is used for evaluating the tracking resistance of insulating materials in humid or con...

SPA-3P6G Spectrum Analzer | Frequency Analyzers

The SPA series Spectrum Analyzer (also called Signal & Spectrum Analyzer, Frequency Analyzers or RF Spectrum Analzers) measures the magnitude of an input signal versus frequency within the full frequency range of...

TMP-L Lamp Cap Temperature Rise Test System

The TMP-L Lamp Cap Temperature Rise Test System (equipped with a wind shield) is a specialized device designed for temperature rise testing of lamp burners and lamp caps. Its core supporting component—the wind sh...

Starter Armature testing panel WIND-ATS-02

Starter Motor Armature Tester test below items 1. Bar to bar resistance (Inter-chip resistance of two commutator bars) 2. Welding resistance (To check the welding quality, the smaller the better) 3. 180° Cross re...

LS2736 Ferrite Core Meter

LS2736/LS2737 Magnetic Core Characteristic Tester (also known as Voltmeter-Ammeter Characteristic Tester) is an intelligent tester specially designed for ferrite core and iron core sorting equipment. It can also ...

LS6515EN Capacitor Meter

LS6515FN type large capacitor meter is a kind of high-precision instrument specially for the test of large capacitance capacitors. In addition to testing capacitance and loss, it can also test the series equivale...