Used test rf

Agilent/Keysight E5505A-System
- Manufacturer: Agilent - Keysight
Phase Test System 50 kHz to 18 GHz Features: Configured for bench R&D or ATE a N9030A PXA or N9020A MXAsignal analyzer) Phase noise measurement software
$45,097 USD
Farmingdale, NJ
Agilent/Keysight 11604A
- Manufacturer: Agilent - Keysight
The 11604A Universal Extension mounts on the front of the 8745A and is used for measuring microwave components. Since it is composed of rotary joints and rotary air lines, its APC-7 connectors will connect to alm...
Farmingdale, NJ
Agilent/Keysight Y1801A
- Manufacturer: Agilent - Keysight
Editable Microsoft PowerPoint slides Covers 45 hours of teaching More than 400 editable Microsoft PowerPoint teaching slides, covering 45 hours of teaching for one full semester are provided. The slides cover the...
Farmingdale, NJ
Agilent/Keysight M9341A
- Manufacturer: Agilent - Keysight
The M9341A digital I/O with a 24-bit digital I/O connector and triggering ports provide communication signals between the PXI vector network analyzer (VNA) installed in the same PXI chassis and an external handle...
Farmingdale, NJ
Agilent/Keysight M9316A
- Manufacturer: Agilent - Keysight
The M9316A PXIe Vector Modulator is a 3-slot module with an integrated wideband IQ modulator and arbitrary waveform generator (AWG) designed to work with the M9383A PXIe Microwave Signal Generator. When ordered w...
Farmingdale, NJ
Agilent/Keysight Y1910C
- Manufacturer: Agilent - Keysight
The Keysight Y1910C precision 1.0-millimeter coax-to-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms and frequenc...
Farmingdale, NJ
Agilent/Keysight Y1910B
- Manufacturer: Agilent - Keysight
The Keysight Y1910B precision 1.0 millimeter coax-to-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms and frequenc...
Farmingdale, NJ
Agilent/Keysight Y1910A
- Manufacturer: Agilent - Keysight
The Keysight Y1910A precision 1.0 millimetre coax-to-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms and frequenc...
Farmingdale, NJ
Agilent/Keysight Y1800A
- Manufacturer: Agilent - Keysight
The RF transceiver kit consists of a transmitter unit and a receiver unit in super heterodyne architecture. The transceiver units are made up of various RF building-block modules such as filter, low noise amplifi...
Farmingdale, NJ
Agilent/Keysight Y1900C
- Manufacturer: Agilent - Keysight
The Keysight Y1900C precision 1.0 millimetre coax-to-ruggedized-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms a...
Farmingdale, NJ
Anritsu 36801K
- Manufacturer: Anritsu
- Frequency range: 40 gigahertz
The 3680 series Universal Test Fixture (UTF) provides an accurate, and repeatable solution for measuring microstrip and Coplanar substrate devices. Input and output connections are made to the substrate device by...
$1,570 USD
Farmingdale, NJ
Agilent/Keysight X752C
- Manufacturer: Agilent - Keysight
- Model: X752C
The Keysight 752 series couplers are an essential part of many microwave measurement applications. Attenuation measurements, reflectometer setups, power measurements, source leveling and network analysis are just...
Farmingdale, NJ
Rohde and Schwarz 1108.6505.30
- Manufacturer: Rohde & Schwarz
Removing RF Extension 30 Remove 30 GHz MW converter unit (140). Note: See description "Replacing MW Converter Unit A160" Disconnect all cables from the extension (2145). Undo 6 screws with washers (2150) from the...
Farmingdale, NJ
Agilent/Keysight 5086-6489
- Manufacturer: Agilent - Keysight
The Directional Coupler assemblies for channel R and test ports 1 and 2 are replaceable on an exchange basis at a considerable cost saving. The test port assembly includes the RF and DC bias connectors, and is th...
Farmingdale, NJ
Agilent/Keysight 8710-1582
- Manufacturer: Agilent - Keysight
Use a torque wrench to make a final connection. It provides information about the torque wrench recommended for use with the calibration kit. A torque wrench is included in the calibration kit. Using a torque wre...
Farmingdale, NJ