8753D - NETWORK ANLYSTER - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 30KHz - 3GHz
used
- Manufacturer: Agilent - Keysight
- Model: 8753D
NETWORK ANALYZER 30KHz - 3GHz - Power: -85dBm +10dBm
Lannion, France
MS420B - Level Scanning - ANRITSU (WILTRON) - 10 Hz - 30 MHz
used
- Manufacturer: Anritsu
- Model: MS420B
Spectrum Analyzer10 Hz - 30 MHz Frequency range: 10 Hz to 30 MHz Amplitude: 100 dB (resolution of 0.01 dB) Phase: 180 (resolution of 0.1 ) Delay time: 0 ~ 400 mS (resolution of 0.1 nS min.) Logarithmic frequency ...
Lannion, France
37347D - NETWORK ANALYZER - ANRITSU EMEA LTD - 10GHz- 20GHz
used
- Manufacturer: Anritsu
- Model: 37347D
Network Analyzer10GHz- 20GHz Multiple Source Control mode and Frequency Offset E/O and O/E measurements Gain Compression application Internal Bias tees
Lannion, France3671L – VECTOR NETWORK ANALYZER – CEYEAR TECHNOLOGIES – 10MHz – 67GHz
used
VECTOR NETWORK ANALYZER10MHz – 67GHz • Frequency Resolution: 0.1Hz • Sweep Speed: 43ms@600KHz IF Bandwidth, 201 Points at Full frequency band • Power Sweep Range: >60dB • Dynamic Range (Typ.): – 90dB (10MHz-50MHz...
Lannion, France4952A - PROTOCOL ANALYZER - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 19.2KBp/s ASYN 64 KBp/S
used
- Manufacturer: Agilent - Keysight
- Model: 4952A
PROTOCOL ANALYZER19.2KBp/s ASYN 64 KBp/S
Lannion, France85131F - Set of flexible cables - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 26.5 GHz
used
- Manufacturer: Agilent - Keysight
- Model: 85131
Flexible Cable Set26.5 GHz Cable frequency range is dc to 26.5 GHz with a return loss greater than or equal to 16 dB. Insertion loss is 0.25 * sqrt(f) + 0.2 dB, where f is frequency in GHz, for the test port conn...
Lannion, FranceN4691B - ELECTRONIC CALIBRATION MODULE - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - DC-26.5GHz 2 PORTS
used
- Manufacturer: Agilent - Keysight
- Model: N4691B
ELECTRONIC CALIBRATION MODULE (ECAL) DC-26.5GHz 2 PORTS
Lannion, France37369D - VECTOR NETWORK ANALYZER - ANRITSU (WILTRON) - 40GHz
used
- Manufacturer: Anritsu
- Model: 37369D
VECTOR NETWORK ANALYZER40GHz
Lannion, France37225C - Network Analyzer - ANRITSU EMEA LTD - 13.5 GHz
used
- Manufacturer: Anritsu
- Model: 37225C
Network Analyzer13.5 GHz Fast Sweeping Synthesized Source Auto Reversing Test Set (37200C/37300C models only) Solid-State Transfer Switch (37200C/37300C models only) Four Independent Display Channels
Lannion, France37369C - VECTOR NETWORK ANALYZER - ANRITSU (WILTRON) - 40MHz - 40GHz 4CH
used
- Manufacturer: Anritsu
- Model: 37369C
VECTOR NETWORK ANALYZER40MHz - 40GHz 4CH
Lannion, FranceZVC - VECTOR NETWORK ANALYZER VNA - ROHDE AND SCHWARZ - 8GHz 2 ports
used
- Manufacturer: Rohde & Schwarz
- Model: ZVC
VECTOR NETWORK ANALYZER VNA8GHz 2 ports - Dynamic range : >130dB
Lannion, France5087-7080 - Oscillator for network analyzer - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 20 GHz
used
- Manufacturer: Agilent - Keysight
Oscillator For Network Analyzer20 GHz
Lannion, FranceE5080A-265 - ENA VECTOR NETWORK ANALYZER - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 9 kHz to 6.5 GHz
used
- Manufacturer: Agilent - Keysight
- Model: E5080A
ENA Vector Network Analyzer9 kHz to 6.5 GHz 2-port test set, 9 kHz to 6.5 GHz with bias tees. Dynamic range: 152 dB (at 3 Hz IFBW), source level -90 to +15 dBm. GP-IB, LAN, USB.
Lannion, France8753ES - S-parameter vector network analyzer 8753ES - KEYSIGHT TECHNOLOGIES (AGILENT / HP) - 30 kHz - 3 /6 GHz
used
- Manufacturer: Agilent - Keysight
- Model: 8753ES
8753ES S-parameter Network Analyzer30 kHz - 3 /6 GHz 30 kHz to 3 or 6 GHz Frequency and power sweeps Available in 50- and 75-ohm Optional time-domain, harmonics measurement, .configurable test set, delete test set
Lannion, FranceMS4623A - Transmiss vector network measurement system - ANRITSU (WILTRON) - 10MHz to 6GHz
used
- Manufacturer: Anritsu
- Model: MS4623A
Vector Network Analyser10MHz to 6GHz Standard connector type: N female bullet Low-cost transmission/reflection analyzer bullet Single-path, dual-port network analyzer for high-volume passive RF requirements
Lannion, France
Tip: Enter manufacturer, model or keyword