Used Materials Testing in Shandong, China

TE-UV2 Manual / Hydraulic

TE-UV2 Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cutting the notch according to t...

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

DIN Abrasion Tester

• Manufacturer: RADE

AT150 DIN Abrasion Tester AT150 is also called DIN, Schopper abrasion resistance tester. Compared with common brands tester of Akron and Grasselli, it has many advantages, such as small required specimen, short p...

Miniature Averaging Axial Extensometers – Model 3442RA1

• Manufacturer: Epsilon

With gauge lengths of 1 and 2 inches (25 and 50 mm) and measuring ranges of 0.050 and 0.100 inches (1.2 and 2.5 mm), the Model 3442RA1 was designed for applications where tensile or compressive strength tests on ...

QK-20 Manual V- notch Cutting Machine

• Manufacturer: Notch

Model QK-20 notch cutter is designed to make impact test specimen of simple beam and cantilever beam, and it possesses the features of simple structure, easy operation, stable performance, and it is the necessary...

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

HB-3000B Brinell Hardness Tester

Use HB-3000B Brinell hardness tester is a bench-top hardness tester, suitable for the Brinell hardness of annealed and normalized workpieces, casting parts, non-ferrous metals and softer parts or unhardened steel...

Miniature Axial Extensometers – Model 3442

• Manufacturer: Epsilon

Weighing as little as 8 grams, these miniature extensometers are designed to have very low operating force with minimal specimen influence. All use an improved version of Epsilon’s dual flexure design which makes...

Rugged, Long Gauge Length Extensometers – Model 3543

• Manufacturer: Epsilon

With over 15 years of proven reliability in the world’s most demanding testing environments, the Model 3543 extensometer is designed to survive in those applications where standard axial extensometers would not. ...

HR-150A Rockwell Hardness Tester

• Manufacturer: Wilson Rockwell

Use HR-150A Rockwell hardness tester is the most popular Rockwell hardness tester, widely used to measure the Rockwell hardness of ferrous metals, non-ferrous metals, non-metallic materials, quenching and quenchi...

HVS-ZA Vickers Hardness Measuring System

• Manufacturer: Vickers

HVS-ZA Vickers Hardness Measuring System 1. This system can match a variety of Vickers hardness tester to upgrade stand-alone hardness tester or computer measuring system. 2. This measuring system can be integrat...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HVS-120TZG Advanced automatic turret digital display Vickers hardness tester

• Manufacturer: Vickers

Production Introduction Advanced automatic turret digital display Vickers hardness tester It adopts electronic electric loading, high-precision sensor, and has a unique closed-loop control system, and each gear f...

TLS-W1000N Computer Control Spring Tensile and Compression Tester

Main Parameter 1. Max. test force: 1000N 2. Test force dividing class：×1, ×2, ×5, ×10 all four classes 3. Test force measuring range: full range of 100N- 1000N 4. Displacement resolution: 0.01 mm 5. Displacement ...