Processing » Agitators, Blenders, Mixers » Agitators » Hiroshima

Building Filters

36

Used Agitators in Hiroshima, Japan

SUS tank with agitator
250L φ710×H640(Body)×H750(Leg) Remarks: Ancillary product for 6931 Pressure Cake Mixer
Hiroshima, Japan
［Satake] Agitator Model No
- Manufacturer: Satake
Shaft and blade material: SUS. Three propellers x 1. Rotation speed: 360 rpm. Base with casters/manual elevation type.
Hiroshima, Japan
［Ikeda Rika] V type mixer No model
- Manufacturer: Ikeda
Capacity: about 10L With agitator Power: 0.2kw/100V | Purchasing area: 60Hz | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Aikosha ACM
- Manufacturer: Aikusho
Agitator: spiral hook with control panel Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
2008 Inoue BDM-50
- Manufacturer: 井上製作所
Agitator: High-speed turbine 2.2kw/variable speed Low-speed butterfly 1.5kw/ variable speed Hydraulic unit: 1.5kw Oil rotary vacuum pump: 0.75kw 2 tanks, 1 control panel
Hiroshima, Japan
2005 Buhler SHP · TS · 40
- Manufacturer: Bühler
Wetted parts material: SUS Hydraulic drive motor Agitator: High-speed turbine, low-speed 3 open propellers Explosion-proof hydraulic unit
Hiroshima, Japan
SUS tank
Total capacity: approx. 3000L. *Some accurate capacity requires actual size measurement due to lack of data. Equipped with an agitator (eG3).
Hiroshima, Japan
SUS tank
Total capacity: approx. 2000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
SUS tank
Total capacity: approx. 1000L. *Since no data is available, actual size measurement is required for some accurate capacity. With agitator (eG3), reduction ratio 1/5.
Hiroshima, Japan
3500L Cylindrical vertical type
Agitator: 5.5kw (Cyclo Decelerator) Jacket：SUS304 Drawing available
Hiroshima, Japan
1990 Iwai Machinery Industry Cylindrical vertical type
- Manufacturer: 岩井機械工業
Type 2 pressure vessel Jacketed and agitated (0.4 kW) Shower ball Bottomless
Hiroshima, Japan
Hitachi, Ltd. Cylindrical vertical type
- Manufacturer: Hitachi
Wetted part material: SUS Flat top and bottom SUS spiral cored Jacket: Coil (transmission surface 5m2) Agitator: 1.5kw Shape: Upper and lower flat
Hiroshima, Japan
3000L Vertical cylindrical type
Agitating blade: Side scraping specification Power: 2.2kw | Material: SUS | Quantity saved: 7 units
Hiroshima, Japan
Izumi Food Machinery Vertical Cylindrical Type
- Manufacturer: イズミフードマシナリー
Jacket and agitator included Shower ball included Power: 1.5kw | Material: Wetted part SUS | Quantity saved: One | Size: Diameter: Approximately 2300φ Overall height: Approximately 3600H
Hiroshima, Japan
350 L Cylinder vertical type
Jacket (for hot and cold water, not steam) Homo mixer (3.7 kw)
Hiroshima, Japan

12 3

Overview

Agitators are essential devices used to stir or mix fluids in various industrial processes. They are commonly found in industries such as chemical, food and beverage, pharmaceuticals, and wastewater treatment. Agitators ensure uniform mixing, improve chemical reactions, and maintain product consistency. They come in different types, including top-entry, side-entry, and bottom-entry agitators, each suited for specific applications.

FAQ

What factors should I consider when purchasing an agitator?

Consider the type of fluid, the viscosity, the required mixing intensity, and the specific application. It's also important to assess the agitator's material compatibility with the fluids being mixed.

How can I ensure the agitator is shipped safely?

Choose a shipping provider experienced in handling industrial equipment. Ensure the agitator is properly packaged and secured to prevent any damage during transit.

What is the typical maintenance schedule for an agitator?

Regular maintenance includes inspecting seals and bearings, checking for wear or damage, and ensuring that all moving parts are lubricated. Follow the manufacturer’s guidelines for detailed maintenance procedures.