- Trusted Seller
Barnstead/Thermolyne Programmable Benchtop Muffle Furnace, Model F48015
used
- Manufacturer: Barnstead/Thermolyne
Barnstead/Thermolyne Programmable Benchtop Muffle Furnace, Model F48015 Operating Range: 100C to 2000°F (1093°C) continuous 100C to 2192°F (1200°C) intermittent Dimensions in Inches (cm):
$1,525 USDEast Lyme, CT - Trusted Seller
Carver Manual Benchtop Pellet Press, Model 4350.L
used
- Manufacturer: Carver
The Carver Manual Benchtop Pellet Press, Model 4350.L, is designed for the preparation of pelletized samples in a laboratory setting. This compact, manual press provides reliable performance for creating uniform ...
$1,795 USDEast Lyme, CT - Trusted Seller
Barnstead Electrothermal Electromantle MV, Cat. No. EM3000/CX1
used
- Manufacturer: Barnstead/Thermolyne
The Barnstead Electrothermal Electromantle MV, Cat. No. EM3000/CX1 offers a maximum temperature of 450°C. The electrothermal aluminum housing is chemical resistant, tough, lightweight and easy to clean. The buil...
$425 USDEast Lyme, CT - Trusted Seller
CEM MAS 7000 Microwave Furnace, Model 920901
used
- Manufacturer: CEM
The CEM MAS 7000 Microwave Furnace is engineered for unparalleled precision, speed, and control. Offering built-in serial and parallel ports for to ash and weigh samples, this oven requires no exhaust hood and ca...
- Trusted Seller
SP Scientific Virtis 35L Genesis SQ EL-85 Pilot Freeze Dryer
used
- Manufacturer: Virtis
The SP Scientific Virtis 35L Genesis SQ EL-85 Pilot Freeze Dryer is a freeze dryer with 35 L capacity. The unit provides superior versatility for research, pilot or small-scale production applications. With over ...
East Lyme, CT - Trusted Seller
Zymark TurboVap LV Evaporator
used
- Manufacturer: Zymark
The Zymark TurboVap LV Concentration Evaporator, P/N 43750, is a workstation that provides simultaneous evaporation of up to (50) 15mL centrifuge tubes, offering many interchangeable tube racks which gives you th...
$2,395 USDEast Lyme, CT - Trusted Seller
Vacuubrand BVC Control Fluid Aspiration System, Cat. No. 20727203
used
- Manufacturer: Vacuubrand
The Vacuubrand BVC Control Fluid Aspiration System, Cat. No. 20727203 is a reliable, compact, and efficient solution for controlled fluid aspiration in laboratory applications. Designed for precise fluid manageme...
$1,175 USDEast Lyme, CT - Trusted Seller
VWR CryoPro V Vapor Shipper, Model V-48
used
- Manufacturer: VWR
- Model: CryoPro
- Capacity: 48 vials
The VWR CryoPro V Vapor Shipper, Model V-48, is designed for the safe and efficient transport of biological samples at cryogenic temperatures. With its innovative design, this vapor shipper ensures optimal temper...
$1,495 USDEast Lyme, CT - Trusted Seller
Millipore Rotary Agitator For Hazardous Waste Pressure Filtration System, Model YT310RAHW
used
- Manufacturer: Millipore
The Millipore Rotary Agitator is a Hazardous Waste Filtration System, Model YT310RAHW is designed to separate solid and liquid phases of waste samples for analysis. Designed specifically for the US EPA Extraction...
$3,950 USDEast Lyme, CT - Trusted Seller
GeneVac VC3000D Vapour Condenser
used
- Manufacturer: GeneVac
The Genevac VC3000D Vapour Condenser is an external 3.0L condenser for HT-8 and HT-12 Evaporators. Condensor consists of a cylindrical vacuum pot with cooling coils connected to a powerful compressor together wit...
$795 USDEast Lyme, CT - Trusted Seller
2011 RAD-CON BELL ANNEALING FURNACE FOR COPPER (14512)
used
- Manufacturer: RAD-CON
RAD-CON 2011 Bell Annealing Furnace for Copper. Natural gas powered, handles non-ferrous coils. Inside: 84" diameter, 70" height. Max temp: 1550°F. 480V, 30A, 3-phase. Operational with 3 retorts, gas manifold, an...
North Branford, CT - Trusted Seller
2019 Sparta 11' Infeed Conveyor
used
- Manufacturer: Sparta
Sparta 11 FT Infeed Conveyor 2019 Model 18" Width 11' Length 8' Length Leg Stand 77" Length Leg Stand Came Out Running
$3,240 USDConnecticut, USA - Trusted Seller
200 Ton, 15.25 oz., Engel Injection Molding Machine (2006)
used
- Manufacturer: Engel
Model: EM 740/200 T | Us tonnage: 200 | Shot size (oz. of ps): 15.25 | Screw diameter: 55 mm | Platen size (in.): 29.9 x 30.51 | Tiebar spacing (hxv) in.: 20.47 x 20.47 | Max mold height (in.): 23.62 | Min mold ...
Connecticut, USA - Trusted Seller
10'w X 10'h X 26'l Batch Oven
used
- Manufacturer: Binks
Inside Dimensions: 10'w X 10'h X 26' l - oven was originally 8'h but was raised 2' to accomodate overhead conveyor - Top Mount Burner (800,000 BTU) - will ship in 5 pieces for quick assembly
Connecticut, USA - Trusted Seller
2016 Desislava 120 HP Granulator
used
- Manufacturer: Desislava
Desislava 120 HP Granulator Wire/Cable/Tires/RDF/E Waste/Plastics Dry or Wet Cutting 2016 Model 5 Fly Knives / 2 Bed Knives 3 Screens: 3/8", 1/8", 1/4" Controls Included Cutting Chamber 20" x 32"
Ravelli Teorema Stone CNC Machining Center
used
- Manufacturer: Ravelli
- Model: Teorema
Good condition Ravelli Teorema Stone CNC Machining Centers available between 2004 and 2011 years. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword