Agilent/Keysight 8757A
- Manufacturer: Agilent - Keysight
- Model: 8757A
The 8757A is a microprocessor-based receiver capable of making scaler (magnitude only) reflection and transmission measurements over a frequency range determined by the external detectors used. It has a large scr...
$1,219 USDFarmingdale, NJ
Agilent/Keysight 85108L
- Manufacturer: Agilent - Keysight
- Model: 85108L
A factory-integrated system (HP 85108L) is also available for the 45 MHz to 2 GHz frequency range. Custom pulsed bias configurations for high (＞100W) and narrow pulses (＜1usec) can be integrated into any pulsed-R...
Agilent/Keysight N5264A
- Manufacturer: Agilent - Keysight
- Model: N5264A
N5264A is an extremely fast microwave receiver, designed for antenna test, near field, far field, and RCS measurements. N5264A replaces the 8530A. Combine it with MXG, 85039, 85320, and 85331 to test RF subsystem...
Rohde and Schwarz ZVRE
- Manufacturer: Rohde & Schwarz
- Model: ZVRE
Zvr-b22: Attenuator for Generator Port 2 | Zvm-b21: Attenuator for Generator Port 1 | Zvk-b21: Attenuator for Generator Port 1 | Fse-b16: Ethernet Interface | Zvk-b23: Attenuator for Receiver Port 1 | Zvm-b23: A...
Agilent/Keysight 85102R
- Manufacturer: Agilent - Keysight
- Model: 85102R
Bottom RF Section of 8530A System 011: Add HP 8510C Firmware Operating System | 008: Pulse Out (BNC) | 010: Time Domain Operation | 013: Optical Fiber HP-IB Extender | 005: Positioner Encoder Compatibility | Cal:...
$2,625 USDFarmingdale, NJ
Agilent/Keysight 35677A
- Manufacturer: Agilent - Keysight
- Model: 35677A
The 35677A S-Parameter Test Set contains the hardware required to make transmission and reflection measurements in both the forward and reverse directions. The only setup required is to connect the device under t...
$625 USDFarmingdale, NJ
Agilent/Keysight 85102B
- Manufacturer: Agilent - Keysight
- Model: 85102B
Signal converter section of the 8510B,C Cal: Calibration Available | As-is: Unit Sold AS-IS | 008: Pulse Out (BNC) | 010: Time Domain Operation | 005: Positioner Encoder Compatibility | 011: Add HP 8510C Firmware...
$1,497 USDFarmingdale, NJ
Agilent/Keysight N5230C
- Manufacturer: Agilent - Keysight
- Model: N5230C
The PNA-L is designed for your general-purpose network analysis needs and priced for your budget. 300 kHz to 6 GHz, 2-port 300 kHz to 13.5 GHz, available in 2- and 4-port 10 MHz to 20 GHz, available in 2- and 4-p...
Agilent/Keysight 8720ES
- Manufacturer: Agilent - Keysight
- Model: 8720ES
The 8720ES features solid-state switching S-Parameter test sets with full two-port error correction. The ES models contain a 55-dB step attenuator as a standard feature for wide output power range. Enhanced respo...
Rohde and Schwarz ZVL3
- Manufacturer: Rohde & Schwarz
- Model: ZVL
Specifications Network Analysis Frequency range 9 kHz (typ. 5 kHz) to 3 GHz/6 GHz/13.6 GHz Measurement time (201 test points at 100 kHz IF bandwidth, with normalization calibration) ＜50 ms Data transfer time (201...
Agilent/Keysight 8530A System
- Manufacturer: Agilent - Keysight
The Agilent 8530A is a fast and accurate microwave receiver designed for both manual and automated antenna measurement and radar cross-section measurement applications. It offers fast data acquisition speeds, exc...
$3,675 USDFarmingdale, NJ
Agilent/Keysight 8755A
- Manufacturer: Agilent - Keysight
- Model: 8755A
The 8755A was designed as a plug-in to be inserted in an oscilloscope mainframe of the 180 series. The system covers a frequency range of 15 MHz to 18 GHz with three newly designed Thin-Film Hybrid HP 11664A dete...
Farmingdale, NJ
Red Hawk / CDT 15531
- Manufacturer: Red Hawk / CDT
Cal: Calibration Available | As-is: Unit is sold AS-IS
$1,150 USDFarmingdale, NJ
Agilent/Keysight N5250A
- Manufacturer: Agilent - Keysight
- Model: N5250A
The Keysight N5250A 110 GHz system is the only bench-top, broadband system with integrated tri-axial bias tees that provides accurate control of device bias through its force/sense ability. This system is ideal f...
Agilent/Keysight 8748A
- Manufacturer: Agilent - Keysight
- Model: 8748A
The 8748A S-Parameter Test Set is a 50 ohm set with a frequency range of 4 to 1300MHz. " Directivity: ＞ or = 40 dB " Attenuator Range: 0 to 70 dB " Max Input: +20 dBm " APC-7 connectors This Operating and Service...
$1,045 USDFarmingdale, NJ
Anritsu MS420J Network Analyzer
- Manufacturer: Anritsu
- Model: MS420J
Good condition Anritsu MS420J Network Analyzers. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword