Rohde & Schwarz ESIB40
used
- Manufacturer: Rohde & Schwarz
- Model: ESIB40
Details The Rohde & Schwarz ESIB-40 EMI Test Receiver operates from 20Hz to 40GHz, designed for precise interference measurements compliant with CISPR 16-1 and VDE 0876. It includes all required detectors, a 20dB...
Dublin, IrelandRohde & Schwarz ESIB26
used
- Manufacturer: Rohde & Schwarz
- Model: ESIB26
Details The Rohde & Schwarz ESIB26 offers high sensitivity and low inherent noise, enabling precise signal detection across a wide dynamic range. Featuring fast measurement speeds, integrated preselection and pre...
Dublin, IrelandNoiseken FNS-AXII-B50
used
- Manufacturer: NoiseKen
Details The Noiseken FNS-AXII-B50 3 Phase Fast Transient / Burst Immunity Test Generator offers precise testing with up to 4,500V output adjustable in 10V steps, meeting IEC 1000-4-4 standards. It supports Contin...
Dublin, IrelandEmco 3810/2 SH
used
- Manufacturer: Emco
Details The EMCO 3810/2 SH Single Phase LISN (Shuko Connector) operates over a frequency range of 9 kHz to 30 MHz, supporting a continuous current rating of 10 A. It features two lines (L+N) plus a ground-switche...
Dublin, IrelandRohde & Schwarz ESU26
used
- Manufacturer: Rohde & Schwarz
- Model: ESU26
Details The Rohde & Schwarz ESU26 is a high-performance EMI test receiver and spectrum analyzer covering 20Hz to 26.5GHz. It is CISPR 16-compliant and meets all commercial and military standards for electromagnet...
Dublin, IrelandSchaffner NSG 200E
used
- Manufacturer: Teseq - Schaffner
Details The Schaffner NSG 200E Mainframe is designed to house up to six different plug-in generators for precise line interference simulation. It provides essential shared functions such as mains connection, filt...
Dublin, IrelandSchaffner CDN125
used
- Manufacturer: Teseq - Schaffner
Details The Schaffner CDN125 Capacitive Coupling Clamp is designed to meet IEC 1000-4-4 / 801-4 standards, providing precise burst pulse and fast transient injection capabilities. It enables accurate testing acro...
Dublin, IrelandRohde & Schwarz ESPC
used
- Manufacturer: Rohde & Schwarz
- Model: ESPC
Details The Rohde & Schwarz ESPC EMI Precertification Test Receiver offers a wide frequency range from 150 kHz to 1000 MHz, supporting all major EMI standards including CISPR, EN, FCC, and VDE. It features parall...
Dublin, IrelandRohde & Schwarz ESVS30
used
- Manufacturer: Rohde & Schwarz
- Model: ESVS
Details The Rohde & Schwarz ESVS30 EMI Test Receiver operates from 20 MHz to 1 GHz and offers full compliance with CISPR16-1 and VDE0876 standards. It features integrated preselectors, selectable 10 dB preamplifi...
Dublin, IrelandRohde & Schwarz ESIB7
used
- Manufacturer: Rohde & Schwarz
- Model: ESIB7
Details The Rohde & Schwarz ESIB7 EMI Test Receiver features a frequency range from 20 Hz to 7 GHz, with exceptional sensitivity (NF typ. 10 dB), low noise (<–3 dBµV), and broad dynamic range. It supports fast sc...
Dublin, IrelandHaefely MAG100
used
- Manufacturer: Haefely
Details HAEFELY MAG100 The Haefely MAG 100 has a 1m x 1m square, single turn antenna. A cur of 120A is needed to feed the coil to produce a field of 100A/m. The MAG100 includes a cur transformer capable of delive...
Dublin, IrelandRohde & Schwarz ESW
used
- Manufacturer: Rohde & Schwarz
- Model: ESW
Details The Rohde & Schwarz ESW provides exceptional signal analysis with frequency coverage from 1 Hz to 44 GHz, supporting compliance with CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461, and FCC standards. It delivers h...
Dublin, IrelandKeysight Technologies 11956A
used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 11956A is a high-power antenna capable of handling a maximum continuous power of 1000 Watts. It maintains a VSWR of less than 2:1 and operates with a 50-ohm impedance. This model in...
Dublin, IrelandKeysight Technologies 84105EM
used
- Manufacturer: Agilent - Keysight
Details The Keysight (Agilent) 84105EM EMC Design Development System integrates the E7401A EMC analyzer and the 11945A close field probe set, offering a comprehensive setup for electromagnetic compatibility testi...
Dublin, IrelandSchaffner NSG431
used
- Manufacturer: Teseq - Schaffner
Details The Teseq Schaffner NSG431 ESD Gun offers precision electrostatic discharge testing from 2 to 21 kV, with a swift rise time of 5 ns ±30 % at 2 kV, a discharge capacitor of 150 pF ±10 %, and a discharge re...
Dublin, Ireland