Used robot controllers in Hesse, Germany

2006 Robot welding cell Cloos type Z6

• Manufacturer: Cloos

The Cloos Romat 320 welding robot is installed in a forklift-capable welding cell with attached partition walls on a stand base for vertical robot support. The Rotrol II V4 control system includes the software op...

2016 QRC 350

Cloos QRC 350 welding robot with Qirox V7 controller, built in 2016 Software options: point editor, arc seam detection, and gas nozzle sensor Consisting of: Fixed C-frame for hanging the welding robot Robot acces...

2008 Cloos QRC 350 with stationary support table

• Manufacturer: Cloos

We can assemble this system example for you from existing components. It features a Cloos QRC 350 welding robot with a stationary support table on a common base frame. A 0- and 180-degree turning table and the we...

2006 Cloos Romat 350 with workpiece positioner HWR 5000 N

• Manufacturer: Cloos
• Model: Romat

The Romat 320 robot mechanism is permanently mounted on a C-frame in a suspended position. A Cloos HWR 5,000 N workpiece positioner is used. This operates as a double-station positioner with horizontal station ch...

2010 Cloos Quirox QRC 410 on C-stand stamped. with WPG-B- 10,000 N

• Manufacturer: Cloos

The ORC 410 robot mechanism is mounted overhead on a freely programmable C-frame. The system is equipped with two GLC 603 Quinto II welding machines for tandem and single-wire welding, as well as for TIG welding ...

2003 Cloos Romat 320/CSTR/CR 402/2XWPG-DP-2.500N

• Manufacturer: Cloos
• Model: Romat

The Romat 320 is mounted on a base in an upright position. It features a Rotrol II 9-axis robot controller with connecting cable and handheld programming device. Software options for the system include a gas nozz...

2008 Cloos Romat 350 2X WPEK-2.500N

• Manufacturer: Cloos
• Model: Romat
• Amperage: 450 ampere

The R350 robot mechanism is mounted in an upright position on a stand base. This base, in turn, is positioned between two V-shaped WPEK 2,500 N workpiece positioners with a load capacity of 250 kg and a turning r...

2002 ZPF 9H,

ZPF 9H, 30 kW 400V/50Hz in the SDG (next to the system), 2 modules with 180 m² filter area Suitable for a wide range of extraction problems at multiple workplaces simultaneously. Suitable for larger air volumes. ...

2014 Rausch deburring machine Gratomat 500

• Manufacturer: Rausch - Gratomat

Rough deburring, fine deburring, modules (m) from 2-8, chamfer geometry 0.1 x m mm, toothing straight/helical/spiral, workpiece Ø max. 500 mm, max. 50 kg, milling spindle 18,000 to 50,000 rpm, Kuka robot, range o...

1997 BATTENFELD WITTMANN BA 400-125 CDC

• Manufacturer: Battenfeld

Fabrikat / manufacturer BATTENFELD WITTMANN Type BA 400-125 CDC Control system UNILOG B4 Schliesskraft / clamping force 400 kN / 44 US tons Year 1998 Holmabstand / dist. betw. tie bars 304 x 304 mm Platte...