Used Presses in Minnesota, USA

Enerpac 25 Ton H Frame Press

• Manufacturer: Enerpac

25 Ton capacity, Rebuilt cylinder, 14" Stroke, Enerpac pump w/ pendant control, Safety cage around press, 1/2hp 115v 1ph, More info coming soon

Kvaerner SP45SLX Screw Press

• Manufacturer: Kvaerner

Kvaerner SP45SLX Dewatering screw press, with Brook Hansen RDH31-AN-50 Gear Drive; Ratio 49.899/1; with General Electric AC Motor, 125hp, 1790rpm, 444T Frame

Kvaerner SP45SL Screw Press

• Manufacturer: Kvaerner

Kvaerner SP45SL Dewatering Screw Press, with Brook Hansen RDH31-AN-50 Gear Drive, 49.899/1 Ratio; with General Eletric A/C Motor 125hp, 1785rpm, 444T Frame

Pacific 600 Ton Hydraulic Press

Model FC-600D7-60, S# A526, Max capacity 600 tons, Punching capacity 400 tons, Bed 60"L x 84"W, 36" Stroke, 36" Open height, 800 IPM Ram approach, 7 to 52 IPM Press, Floor to top of bed 42", 460v 3ph, Overall Dim...

Wabash 15 Ton Hydraulic Press

• Manufacturer: Wabash

Model G15-15-LX, S# 10331, 15 Ton capacity, Compression cylinder 4 x 6, 2hp 460v 3ph 60hz, More info coming soon

Wabash 15 Ton Hydraulic Press

• Manufacturer: Wabash

Model G15-15-LX, S# 10332, 15 Ton capacity, Compression cylinder 4 x 6, 2hp 460v 3ph 60hz, More info coming soon

Hastings Manufacturing Heated Hydraulic Press

Model 301 T RL, S# 1105921, CTC Parker Automation touch screen control, Heated platens, 480v 3ph 75 amps, More info coming soon

Andritz/Dupps Dewatering Screw Press Model 3620

• Manufacturer: Andritz
• Model: 3620

Dewatering Screw Press With Falk Gear Box, Motor, Control Panel, Production 205 Admptd Or 184.5 Bdmpto, Per Press Or 410 Admtpd For Two Presses, Inlet Consistency 4,0% Bd, Discharge Consistency 30% Bd, Temperatur...

Sprout Bauer Screw Press Model 575-18-3

• Manufacturer: Sprout Bauer

Model 575-18-3 Dewatering Presses Main Drive 100 hp, 965 rpm 316 stainless steel construction Total weight 13,500 lbs Compression Screw weight 3450 lbs. Consistency 3-3.5% inlet, 35% outlet Design @ approx. 100 s...

Thune Eureka Sludge Press Model SP-32L

• Manufacturer: Eureka

Made in Norway S/N SHP-89-6015 Stainless Steel Material Thune Eureka Norway dewatering screw press model SP-32L; stainless steel material

Nugier 40 Ton Hydraulic H Frame Press

Model H40-7, S# VN2482066, Capacity 40 ton, More info coming soon

Wabash 50 Ton Hydraulic Press

• Manufacturer: Wabash

Model 50-1515-2TMX, S# 8607, 50 Ton capacity, Compression cylinder 7x7, Electric heated platens @ 8,000 watts each, Air & water cooling, 3hp 208v 3ph 65 amps full load, More info coming soon

Seal Spacer for Andritz / Dupps Dewatering Screw Press model 3620

• Manufacturer: Andritz
• Model: 3620

Andritz/Dupps Dewatering Screw Press Model 3620 Seal Spacer, Unused Storeroom Spare, 11″ Outer Diameter, 7.75″ Inner Diameter

Seal Spacer for Andritz / Dupps Dewatering Screw Press model 3620

• Manufacturer: Andritz
• Model: 3620

Andritz/Dupps Dewatering Screw Press Model 3620 Seal Spacer, Unused Storeroom Spare, 15.18″ Outer Diameter, 10.87″ Inner Diameter

Andritz Sprout Bauer 575-18-3 Screw Press

• Manufacturer: Andritz

Andritz Sprout Bauer 575-18-3 Screw Press, stainless steel