Building Filters
- Trusted Seller
PET bottle filling line
- Manufacturer: Procomac
Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera,...
Freising, Germany - Trusted Seller
2018 ZILLI & BELLINI GD48/12
- Manufacturer: Zilli & Bellini
Overview The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sa...
- Trusted Seller
2013 Gangloff-Scoma Monobloc
- Manufacturer: Gangloff-Scoma
Overview This monobloc filler for still water was manufactured in 2013 by the French company Gangloff-Scoma. The machine is designed for atmospheric filling of PET bottles ranging from 0.33 L to 2.5 L, currently ...
- Trusted Seller
2020 ALWID GARANT-MDM
- Manufacturer: Garant
Overview This filling machine from the German manufacturer ALWID is equipped with 8 filling heads and is specifically designed for filling small-volume bottles (100 ml) . Precise dosing is achieved using mass flo...
- Trusted Seller
2021 ALWID GARANT-MDM
- Manufacturer: Garant
Overview The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification...
$818,513 USDMenslage, Germany - Trusted Seller
1999 KHS Monobloc
- Manufacturer: KHS
Overview This KHS filling monobloc was manufactured in 1999. The filling monobloc is still in production until the end of October and can be viewed in person. The special feature of the filler is that it can proc...
- Trusted Seller
2021 ALWID ATEX
- Manufacturer: ALWID
Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill chemical products into plastic containers. With the exception of the bottle feeder and Posimat...
$1,217,527 USDMenslage, Germany - Trusted Seller
glass bottle filling plant
- Manufacturer: Diverse
Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pas...
Freising, Germany - Trusted Seller
2007 Krones Sensometic
- Manufacturer: Krones
Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Formats: 200 ml glass bottle 237...
- Trusted Seller
2018 Alfatek Compact 7.1 LP
- Manufacturer: Alfatek
Overview This atmospheric filling machine was manufactured by Alfatek in 2018 and is designed for filling 330 ml bottles with crown caps. The machine achieves an output of 800-1,000 bottles per hour and was last ...
- Trusted Seller
2018 Gruber AFD6
- Manufacturer: Gruber
Overview The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. T...
- Trusted Seller
2004 Klinger, Krone, Nate and others
- Manufacturer: Klinger
Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designe...
- Trusted Seller
1998 GAI 5003
- Manufacturer: Gai
Overview This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately. Technical Details Machine equipped for the following bottle forma...
- Trusted Seller
2017 ALWID SUPERIOR-16D/4SK
- Manufacturer: ALWID
Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machin...
- Trusted Seller
2018 Robak Stork VS 24/8
- Manufacturer: Robak Stork
Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in exce...
Ilapak DELTA Bottling, Filling & Packaging
- Manufacturer: Ilapak
- Model: DELTA
Good condition Ilapak DELTA Bottling, Filling & Packagings available between 2002 and 2014 years. Located in Germany and other countries. Click request price for more information.
Germany