Used Industrial Automation in Saxony, Germany

ROEMHELD lever clamp

Lever clamp ROEMHELD , HILMA, STARK 1825111 913886 S36 Flange: 55 x 55 mm, hole spacing: 42.5 mm Insert cylinder: Ø 30 mm, length: 31 mm New !

GENUS TECH® pneumatic clamps

Pneumatic clamps GENUS TECH® 110MPNI433 New ! 2x square: 20 x 20 x 10 mm | Mounting bracket: 80 x 54 / 74 x 16 mm | Hole distance: 62 mm | 2x drilling: 14,1 mm | Dimensions: 271 x 144 x 62 mm

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 32x10Rx3,969 R15103F541 Thread: Ø 32 mm Thread: M20 x 1.0, length: 22 mm Shaft piece: Ø 20 mm, length: 25 mm Shaft section: Ø 20 mm, length: 18 mm Shaft end: Ø 18 mm,...

IAI CORPORATION rotation axis

• Manufacturer: IAI

Rotation axis IAI CORPORATION ROBO CYLINDER RCP2-RTBBL-I-35P-30-360-P1-R05 approx. 0.2 m connection cable used, tested!

STAR rail guide table

Rail guide table, linear unit STAR (REXROTH) STAR-matic 1460-305-00 ID No. 69553 Used, tested!

FESTO linear unit

• Manufacturer: Festo

Linear unit, linear drive FESTO DGPL-40-1300-PPV-A-KF B 161794 limited to 1200 mm ) with 2x position sensors and 2x shock absorbers used, tested!

REXROTH linear guide rail

• Manufacturer: Bosch - Rexroth

Linear guide rail, 2 pieces REXROTH R180536161 RSA-035-SNS-N Width: 34 mm, height: 31.1 mm Other quantities on request ! New !

THK linear guide rail

Linear guide rail THK SR20-2140L(GK) RAIL mm all holes: Ø 6 / 9.5 mm, depth of blind hole: 8.5 mm Spare part from the company MURATA MACHINERY EUROPE GmbH New !

LINMOT linear motor with slider

Linear motor with slider LINMOT PS01-23x160 stator with approx. 0,8 m connection cable used, tested !

INA linear unit

Linear unit INA RUE 55 W2 / 1740 ( RUE55W3/1740 ) 1740 mm 2x linear guide carriage 1x damping unit New !

THK linear guide carriage with linear guide rail

Linear guide carriage, with linear guide rail THK HSR30 Linear guide carriage: Length: 94 mm, width: 60 mm, height: 37 mm Hole spacing: 40 mm, 4x threaded hole: M8 x 1.25, depth: 12 mm Linear guide rail: Length: ...

THK linear guide carriage with linear guide rail

Linear guide carriage, 2 pieces, with linear guide rail THK 2x HSR25 Linear guide carriage: Length: 80 mm, width: 70 mm, height: 29 mm Hole spacing: 57 / 45 mm, 4x threaded hole: M8 x 1.25, depth: 16 mm ( continu...

CHAMBRELAN telescopic slide guide

Telescopic runner, with double extension, 2 pieces CHAMBRELAN 800 mm used, tested !

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK3232D Thread: Ø 32 mm Shaft piece: Ø 15 mm, length: 37 mm, groove width: 5 mm Thread: M20 x 1.0, length: 14 mm, groove width: 5 mm Bearing seat: Ø 20 mm, length: 25 mm...

KÄHNY vibratory feeder

Vibratory feeder, sorting vibrator KÄHNY SPECIAL MACHINES SG270R 3x electromagnet: E070000118 220 V 50 Hz, 0.5 A approx. 0.3 m connection cable used, tested !